10 Things We Do Not Like About Repairs To Upvc Windows

Repairs to uPVC Windows

uPVC windows are an excellent option for modern homes. They are easy to maintain and are durable and long-lasting. In contrast to aluminium and timber, they do not corrosion or rot.

Regularly cleaning and lubricating UPVC windows and doors is crucial. This will prevent unnecessary repair costs as well as improve the efficiency of energy.

1. Broken Glass

If the glass in your window has been damaged, it can cause a huge amount of damage to your home, making it extremely dangerous and possibly fatal. It is essential to take the time to ensure that you are doing everything you can to keep your windows in good repair.

For single pane windows, it is relatively easy to replace them, and the replacement is usually able to fit into the frame that was previously installed easily. If windows with double panes are joined by internal beading, it will be harder to remove and replace the panes that were previously in use. In this instance, you will need to locate some plastic spacers that aid the new pane in being able to fit perfectly into the frame of the window.

If you are going to try to remove the window panes yourself it is crucial to wear the appropriate safety equipment that includes gloves with a thick layer of material and protective eyewear. You should also lay down a dropcloth before you begin working on the window panes so that any shards fall on the fabric, not onto the floor, where they could be trampled.

It's a great idea tape the gap once the glass is removed. This will stop water and drafts from entering your home until a professional comes out to repair the window. This will also provide a barrier to prevent any intruders from getting into your home. If the gap is large, you might want to consider using a security door that has an integrated window as it offers the best of both worlds.

2. Sagging

Upvc windows and doors are a cost-effective energy efficient, durable and long-lasting alternative to timber windows with sash. In time, they could develop a number of problems such as sagging. A window that is sagging can cause problems with light, draughts, and even security. It's important to take action immediately if you notice your uPVC windows are sliding.

To fix a sagging window you can try repositioning the hinges. To accomplish this, you'll have to open the window so that you can get to the frame. Then, remove both the top and bottom hinges using a screwdriver and adjust them counter-clockwise or clockwise. Close your window to test the fit after having relocated your hinges. If you are happy with the fit of your window, you can tighten screws to secure them in the right position.

If you are unable to reposition the hinges, you might have to replace the seal. Over time, rubber seals lose their elasticity and dry out, which causes their tightness to decrease. If this happens, it's important to replace the seal as quickly as possible to ensure your uPVC windows are watertight and safe from drafts.

UPVC handles can also become loose. This is often caused by screws that have loosened over time, but it can be due to the handle mechanism getting worn out. It's relatively simple to repair a loose uPVC handle. The first step is to close the window and upvc window repairs then perform an initial test to ensure that it fits. The joints at the corners of the sash must align with the joint on the casing. If it does not then you can use the screwdriver to loosen up the handle. Then, turn the mechanism into position.

3. Water Leaks

It is important to act if you awake each day to find mouldy walls and floors that are wet. Water leaks through windows can cause structural damage to your home and affect your ability to regulate the temperature in your home. The most common reason for leaking uPVC windows is that the sealant around the frame is either damaged or missing.

This is an easy fix that can be accomplished by any DIYer who has the ability. Based on the severity of the issue the caulking used previously might need to be removed before a new layer can be applied. It is essential to remember that when it comes to uPVC window repairs, you should avoid the temptation to "over-caulk in order to make the area more difficult to clean and can reduce the efficiency of your energy.

It is essential to ensure that the drainage holes are free of debris and that the sill pan is placed in a way that allows it to drain away from the window. In more serious instances, you might have to consider replacing the window.

Mold spots and rotten sills are another sign of water leakage. This fungus thrives under conditions of dampness and can spread quickly throughout the home.

It is also important to remember that if the leak originates from the glass of your double glazed windows it may be more likely to be an issue with the glass seal, rather than the frame or sagging. A uPVC specialist can easily fix this problem by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

Hinges could be at fault when your uPVC window is difficult to open or it opens with an ease. These are easily repaired by any DIYer who is skilled and can be done within a few minutes.

Like all mechanical parts hinges will wear out over time. It's very simple to change a window hinge but it's much easier if someone else helps hold the frame.

Verify that the uPVC hinges are closed and open in the correct direction. Check for the arrows on each hinge to determine which way the window should be opened.

Faulty window hinges could be the result of incorrectly opening the window a certain manner or because of inadequate installation at the factory. This issue can be fixed by sending us a photo via our website and we will be pleased to offer you advice.

Regularly lubricating hinges is also essential. Applying an engineering lubricant that is light to the hinges is a good way to do this. We recommend using an oil that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It can also reduce the possibility of a window getting stuck and stop corrosion. The ideal time to do this at least once a year. WD40 and other solvent based oils are not recommended because they will damage parts of your uPVC window.

5. Draughts

Draughts in upvc windows can be caused by a few different factors. The hinges can also become disaligned as a result of wear, which can cause a gap between the frame and sash. These can be easily repaired by giving them thorough clean, however if they are beyond repair it could be necessary to have them aligned or replaced. The interlock, which is located on the hinge of the window, can be misaligned. Again, it may be possible to give them a clean but in certain cases, it may be necessary to get them replaced.

The second most frequent reason for draughts is window seals. They can become worn down or damaged over time, and will allow air to escape through the gaps. Replacement of these with high-quality weatherstripping can help prevent draughts. Another option is to replace the window repairs near me with low-emissivity glass. this will help in regulating indoor temperatures and will lessen the risk of draughts.

Lastly, one of the most effective ways to cut down on the draughts in your home is to use a draught excluder. These are typically fabric tubes which are filled with a type of filler. They can be put on the windowsill on top. They can keep your home warm by blocking cold air.

With a bit of regular maintenance and repair, your upvc windows will provide an excellent level of security and insulation for your home. However, it is important to realize that all windows have a lifespan and they may reach a point where it is more cost-effective to replace them rather than fix them. If you have any problems with your window made of upvc it is recommended to speak with a professional immediately.