11 Ways To Completely Sabotage Your Repairs To Upvc Windows

Repairs to uPVC Windows

uPVC windows are a great choice for modern homes. They are durable, long-lasting and easy to maintain. They do not get rotten or rusty like aluminum or timber.

It is important to clean and oil UPVC doors and windows regularly. This will save you from unnecessary repair costs and increase energy efficiency.

1. Broken Glass

The damaged glass in your windows could cause severe damage to your home, and could even be fatal. It is important to make sure that your windows are in good shape.

For single pane windows, it is fairly easy to replace windows, and the new one is usually able to fit into the frame of the previous one easily. However, Upvc Window repair if you have double pane windows that are anchored by internal beading, it'll be more difficult to get rid of the old panes and put in new ones. In this instance it is essential to buy plastic spacers to aid in fitting the new pane into the window frame.

Wearing eye protection and thick gloves is essential if you plan to remove the glass yourself. It is also recommended to lay down a drop cloth before you start working on the glass to ensure that any fragments of glass fall onto the cloth rather than on the floor where they can be trodden under and cause further damage.

Once the glass has been removed, it's a good idea to cover the gap with some clear packaging tape or duct tape to stop water and upvc window repair drafts from entering the property until a professional is able to come out and repair the window. This will also act as a barrier that will prevent any intruders from getting access to your home. If the gap is particularly large, you might be interested in a security door that has an integrated window, as it will provide the best of both worlds.

2. Sagging

uPVC windows and doors are a cost-effective energy-efficient, durable and long-lasting alternative to timber sash windows. As time passes, they may be affected by a variety of issues, including sliding. A sagging window in uPVC could cause issues with light, draughts, and even security. If you find that your uPVC window is beginning to shrink, it's important to act quickly to stop the issue from worsening.

To fix a sagging window you can try to reposition the hinges. First, you'll need to open the windows to reach the frame. Then, remove both the hinges at the top and bottom using a screwdriver and adjust the hinges clockwise or counter-clockwise. Once you've repositioned the hinges, close your window and verify the fit. If you are happy with the fit of the window, tighten the screws to keep them in the right position.

If you are unable to reposition the hinges, you may have to replace the seal. Over time, rubber seals lose their elasticity and dry out which causes them to lose tightness. It is important to replace your seal as quickly as you can to ensure that your uPVC window watertight and draughtproof.

uPVC handles may also loosen up. Often this is due to screws that have become loose over time. However, it could occur because the handle mechanism has worn out. Fortunately, it's easy to fix the loose uPVC window handle yourself. First, you'll need to close your window and do a test to ensure that it fits. The corners of the sash must be aligned with the casing joint. If it doesn't, you can use a screwdriver or a wrench to loosen the handle and then reverse the mechanism back into the position it was in.

3. Water Leaks

It is essential to take action if you get up each morning to discover mouldy walls and floors that are wet. The leaks of water through windows could cause structural damage to your home, and impact your ability to regulate the temperature inside your home. Most often, uPVC window leaks are caused by a damaged or missing sealant.

This is a simple fix that can be completed by any DIYer who has the ability. Depending on the severity of the issue the old caulking might need to be removed before a new layer can be applied. When it comes to uPVC repair, you must avoid 'over-caulking'. This will make your window more difficult to clean and decrease its energy efficiency.

It is important to check that the drainage holes are clear of debris and that the sill pan has been angled properly so that it drains away from the window. In more serious instances, you may need to replace the window.

Other indicators of water leakage are decayed sills and the appearance of black spots of mold on the walls near the window. This fungus thrives under damp conditions and can spread quickly throughout the home.

If the leakage occurs between the double-glazed glass, it is more likely the problem is related to the seal, not the frame. It is also possible to be fixed by a uPVC window expert who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are brittle to open, or loose and open with a breeze it could be the hinges that are at fault. Anyone who is a skilled DIYer can fix these in a matter of minutes.

Nearly every home in the UK will have either top hung or side hung upvc window repair windows that are hinged and like any mechanical part they can wear down over time. Changing a window hinge is essentially a very simple process but it can be easier to do when you have a person to assist in holding the frame in place.

Verify that the uPVC hinges open and close in the right direction. Look for the arrows on each hinge to determine which direction the window should be opened.

Window hinges that aren't working properly can be caused by incorrectly opening the window in a particular manner or because of poor installation at the factory. This can often be resolved by sending us a photograph through our website and we will be happy to give you suggestions.

Regularly lubricating hinges is also essential. This can be accomplished by applying an oil that is light in nature to the hinges, we recommend using a solvent-free lubricant, such as the 3-in-one Multi-Purpose oil. Regularly lubrication makes the window easier to open and close. It also decreases the risk of a window sticking and help prevent corrosion. This must be done at a minimum every year. WD40 or other solvent-based lubricants should not be used since they could damage your uPVC windows.

5. Draughts

Draughts can be caused by a variety of different things. The hinges, also because of wear and tear, may become displaced, which causes gaps to develop between the sash and the frame. If they're beyond repair, it may be necessary to have them realigned. The interlock may be unbalanced. This is located on the hinge's side, and may need to be cleaned. In some instances, it may be necessary to replace them.

These seals are susceptible to wear and tear or become damaged over time, allowing air escape. This can be prevented by replacing them with high-quality weatherstripping. Another option is to replace the window with low-emissivity glass, which will help regulate indoor temperatures, and also lessen the risk of draughts.

One of the most effective ways to reduce the draughts in your home is to use a draught excluder, these are typically fabric tubes which are filled with a type of filler. They can be placed on top of your windowsill. These will keep your home warm by blocking cold air.

With a little regular maintenance and repair your windows made of upvc will provide a great level of security and insulation for your home. It is crucial to keep in mind that all windows eventually become worn out, and it may be more cost-effective to replace them rather than repair them. If you encounter any issues with your Upvc Window repair window, it's best to consult an expert as soon as you can.