20 Trailblazers Leading The Way In Upvc Window Handle Replacement

UPVC Window Handle Replacement

Replacing a damaged window handle is a relatively easy task and, with the right tools, it can be done quickly. It's important to know the type of handle you have and its spindle size before purchasing an alternative.

Older uPVC window handles have a spur that extends and is locked over a wedge striker. They can be left- or right-handed and should match when replaced.

What kind of lock and handle do I have?

There are many kinds of window handles made of upvc and locks, each with its distinct advantages and functions. The type of handle that you own will determine if your locking mechanism is efficient and also if it is simple to open windows. Over time, and with regular use the upvc handles that are on your windows could get worn out and damaged. This makes them less secure and UPVC Window Handle Replacement less effective. In some instances they could even be completely removed. If you find that your window handles have been removed, it's essential to repair them as quickly as possible. This will help stop potential burglaries and protect your home from burglary.

It is a good thing that replacing your window handles made of plastic is a fairly simple job that is achievable by nearly everyone. You'll need a few tools, but with the right knowledge, it is a straightforward process that should take only a couple of minutes. You will need to be aware of the type of handle or lock that you have on your window. This will help you select the right replacement.

Inline Espagnolette Handles

They are the most popular kind of upvc handle and are usually located on the outside of your window. They are flat and feature a latch which engages the locking mechanism of the window frame. Inline upvc handles also come with a spindle that goes through the center of the handle and into the window frame to operate the latch.

Cockspur Handles

They are usually found on older uPVC windows and have an distinctive hook-shaped design. Cockspur handles have a single screw that is used to secure the handle to the frame and are not as secure as other kinds of window handles.

Handles that can tilt and turn

As opposed to the other handles made of upvc, tilt and turn handles can be rotated to open the window and tilted inwards to let air flow in. They feature a 7mm spindle on the back and are available both in right and left-handed versions.

When purchasing replacement handles made of upvc, it is important to check the spindle length since not all of them are identical in size. Drop something into the middle of the hole to measure the length. This is the length of the spindle that will fit your window.

What is a spindle?

uPVC window handles work similar to doors, by turning the handle to activate an opening inside the frame. This opens the window so it can be opened and closed. The handles can become damaged, particularly if they're used frequently or subjected to harsh conditions. This could mean that you have to replace your uPVC handles for windows as they might not operate the window pane replacement properly anymore.

There are a variety of uPVC handles, including Espag, Cockspur, and Spaded handles. These handles are designed in a variety of ways to fit into uPVC frames. Each handle style uses an entirely different spindle for locking the window mechanism. It is important to identify the type of handle you have installed on your uPVC windows so that you can replace it with the right one.

You can determine the type of uPVC handle you have by taking a look at the base of your handle. A snap-in cover should be over the screw that holds the handle's base in position. When you remove this cover and you'll be able to see the screw that holds the handle base in place. After both screws have been removed then you should be able to pull the handle from the uPVC.

After taking off the uPVC handle, remove it from the locking mechanism. Make note of the length of the spindle, as you'll need to ensure that you purchase one that is the same length as your original handle and locking mechanism.

The spindle wears out and cannot operate the locking mechanism. This could be due wear and tear from continuous use or a loosening of the locking mechanism or even rust over time. When this happens it is required to replace the window handle as well as the locking mechanism to restore the full functionality to your uPVC windows.

How do I get rid of my old handle?

Over time and through everyday use, window handles can become damaged or broken and if this happens, it is important to repair them as soon as you can to ensure the safety of your home. Fortunately, replacing a damaged or worn handle is a fairly easy task that can be accomplished in just over a minute and doesn't require any specialized tools.

The first step in removing the old handle is to remove the screw that is situated on the top of the base of the handle. After this screw is removed, the handle can be removed from the base. A second screw is situated at the base of the handle. This can also be removed. Once the two screws are removed, the handle will be removed from the window's base.

After removing the old handle and align the fixing holes of the new handle to the holes that are already in the window frame. If there is a sticker or cap on the new handle remove it if necessary and then screw the handle in place. It is crucial to verify whether the handle functions after it has been installed. Turn the handle around and ensure that the lock mechanism is in place.

Espag handles have spindles that protrude out of the handle and slot into the multipoint locking mechanism on the window frame. Cadenza windows come with a blade with cutouts that fit into the lock mechanism. Cockspur handles are long and are hung over the frame that surrounds the window or the transom crossmember of the bar.

Once you have the new handle in place, you can insert the spindle inside the lock inside the window and then tighten it down. When the handle is fixed then replace the snap-in cover and screw cap (if applicable). Once the handle is ready for use, you can open and close the window a few times to make sure it is working properly and securely.

How do I fit the new handle?

Switching your uPVC window handle isn't a big deal and the process is actually very simple. All you require is a screwdriver and little bit of patience. First, ensure that the old handle is unlocked. Then, remove any screws visible. You could also replace them with screw caps. After the handle has been removed and you are ready to take an note of the length of the spindle which protrudes from the back of the handle. This is important as it will determine the kind of handle that you will require to purchase.

Espagnolette handles are the most common type of handle used on uPVC windows. The spindle is inserted into the handle to operate the locking mechanism inside the window frame. The handle releases the latch, allowing the window to open. When used regularly and time, espagnolette handles may be damaged.

Cadenza handles are a different kind of uPVC window pane replacement handle, which is typically used on tilt and UPVC Window Handle Replacement turn windows. They feature a protruding blade that operates a multiple-point locking mechanism inside the window. They are more secure than an espagnolette handle as they can only open from the inside. They can be replaced by the same method as espagnolette handles however you will need to ensure that the new handle has an angled blade, as opposed to one that is flat.

Once you've decided on the right handle for you then you can place the new handle to the existing screw holes and then screw it in the appropriate position. Then, you should put the screw covers on and test your new handle. This is accomplished by moving the handle from locked position to the unlocked and vice versa several times. It may be worth contacting an expert to see how you can fix any problems. They can provide advice on how to solve the issue in a quick and effective manner.