11 Ways To Completely Sabotage Your Repairs To Upvc Windows

Repairs to uPVC Windows

uPVC windows are an excellent option for modern homes. They are easy to maintain and are durable and long-lasting. They don't get rotten or rusty like aluminum or timber.

It is crucial to wash and oil UPVC doors and windows on a regular basis. This will reduce repair costs as well as increase energy efficiency.

1. Broken Glass

The broken glass in your windows can cause severe damage to your home and even be fatal. It is important to make sure that your windows are in good condition.

Single-pane windows are relatively simple to replace, and they will usually fit into the frames that were previously in use very easily. If you have double glazed Window repairs-paned windows which are joined by internal beading, it will be harder to remove and replace the panes that were previously in use. In this situation, you will need to locate some plastic spacers that will assist the new pane to fit properly into the window frame.

If you plan to try to remove the window panes yourself it is crucial to wear appropriate safety gear that includes gloves with a thick layer of material and eye protection. You should also lay down a dropcloth before you begin working on the window panes, so that any shards fall on the fabric, not onto the floor and could be trampled under.

It's a good idea to cover the gap with tape after the glass has been removed. This will prevent drafts and Double Glazed Window Repairs water from getting into your home until a professional arrives to repair the window. This will also provide an obstruction to prevent criminals from getting into your home. If the gap is particularly large, you may be interested in an alarm door that comes with an integrated window, since it will provide the best of both worlds.

2. Sagging

Upvc windows and doors are a cost-effective, durable and energy-efficient alternative to timber windows made of sash. Over time, they can be affected by a variety of issues that include sagging. A sagging uPVC window could cause issues with light, draughts and even security. It's important to take action when you discover that your uPVC windows are sagging.

To repair a window that is sagging, you can try to reposition the hinges. To do this, you'll need to open the window so that you can get to the frame. Then, using an screwdriver, remove the hinges on the top and bottom and adjust them by turning them clockwise or anti-clockwise. Once you've repositioned the hinges, close your window and verify the fitting. If you're satisfied with the fit of your window, you can tighten screws to keep them in place.

If you are unable to move the hinges, you might need to replace the seal. Rubber seals can dry out and lose their elasticity over time, causing them to loose their elasticity. If this happens, it's important to replace the seal as soon as you can to ensure that your uPVC windows remain watertight and safe from drafts.

UPVC handles can also loosen up. Often this is due to screws that have become loose over time. However, it could also happen because the handle mechanism has worn out. It's a good thing that it's simple to fix the handle of a window that is loose yourself. First, you'll need to shut the window and then perform an experiment fitting. The joints at the corners of the sash must align with the joint on the casing. If it isn't, you can use the screwdriver to loosen the handle. Then, turn the mechanism to position.

3. Water Leaks

If you awake to wet floors and mouldy walls each time it rains, it's crucial to take action. Water leaks from windows not only lead to the degradation of your home's structure but also undermine your efforts to regulate the temperature in your home. The most frequent reason for leaking uPVC windows is that the sealant around the frame is either damaged or missing.

This is a relatively easy fix and should be undertaken by any DIY expert. Depending on the severity of the issue the old caulking might need to be removed before a new layer is applied. It is crucial to remember that when it comes to uPVC window repairs, do not be tempted to 'over-caulk in order to make the area harder to clean and reduce your energy efficiency.

It is crucial to make sure that the drainage holes are clear of debris and that the sill pan is angled in a way that allows it to drain away from the window. In more extreme instances, you may need to replace the window.

Other signs of long-term water leakage include rotted sills and the appearance of black spots of mold on the walls near the window. The mold thrives in damp environments and can quickly spread across the house.

It is also important to keep in mind that if the leakage originates from the glass in your double glazed windows it may be more likely to be a problem with the glass seal rather than the frame or sliding. Again this can easily be corrected by a uPVC window specialist who will replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be the reason if your uPVC window is difficult to open or if it blows open with a breeze. Anyone who is a skilled DIYer can fix the hinges in a matter of minutes.

Most households in the UK will have either top hung or side hung uPVC windows that use hinges and like any mechanical part they can wear down over time. It is an easy process, but it's easier when you have a person to help hold the frame up.

Make sure that the uPVC hinges are closed and open in the proper direction. Look for the arrows on each hinge to determine which direction the window repair should be opened.

The issue could be caused either by opening the window incorrectly or due to a poor installation at the factory. This issue can be fixed by sending us a picture via our website and we will be pleased to offer you suggestions.

It is also essential to grease the hinges regularly. This can be accomplished by applying a light engineering oil on the hinges. We suggest using a solvent-free lubricant such as 3-in-one Multi-Purpose Oil. Regular lubrication will make the window easier to open and close. It can also reduce the chance of windows sticking and prevent corrosion. This should be done at least every year. WD40 and other solvent-based lubricants are not recommended as they can damage your uPVC windows.

5. Draughts

Draughts can be caused by a variety of different things. Firstly the hinges, again because of wear and tear, could become misaligned. This will cause gaps to develop between the sash and the frame. This can be easily repaired by giving them good clean, but when they're beyond repair, it may be necessary to get them realigned or replaced. In addition, the interlock could also become disaligned. It is located on the hinge's side, and may need to be cleaned. In certain instances it is possible to replace these.

The next common reason for draughts is window seals. These can become worn down or damaged over time and will allow air to escape through these gaps. Installing high-quality weatherstripping will help to keep draughts at bay. Another alternative is to replace the upvc window with low-emissivity glass. which will help regulate indoor temperatures, and also reduce the possibility of draughts.

The last way to reduce the amount of draughts is to use a Draught-exclusion device. These are usually fabric tubes filled with a filler which can be hung over your window sill. They will help keep cold air out and keep your home warm and cosy!

With a little maintenance and repairs, your upvc windows will continue to provide excellent security and insulation for your home. It is crucial to keep in mind that all windows eventually become worn out, and it could be more cost-effective to simply replace them rather than repair them. So, if you're having issues with your upvc windows, it is always best to seek professional assistance as soon as possible.