The 10 Scariest Things About Repairs To Upvc Windows

Repairs to uPVC Windows

uPVC is an excellent option for modern homes. They are easy to maintain and are durable and long-lasting. They do not decay or rust as aluminum and timber.

It is important to clean and oil UPVC windows and window repairs doors regularly. This will help prevent unnecessary repair costs and also improve energy efficiency.

1. Broken Glass

If the glass in your window has been damaged, it can cause a great deal of damage to your home, making it extremely dangerous and possibly fatal. You should take the time to ensure that your windows are in good working order.

For single pane windows, it is fairly easy to replace them, and the replacement is usually able to fit into the frame of the previous one easily. However If you have double-pane windows that are anchored by internal beading, it'll be more difficult to take out the existing panes and install new ones. In this case you'll need to source some plastic spacers that help the new pane to fit correctly into the frame of the window.

If you are going to attempt to remove the window panes by yourself it is important to wear the appropriate safety equipment that includes gloves with a thick layer of material and eye protection. It is also recommended to lay down a dropcloth before you begin working on the window panes to ensure that any shards of glass fall onto the fabric, not onto the floor, where they could be trampled under.

It's a great idea seal the gap after the glass is removed. This will keep water and drafts from entering your property until a professional is able to fix the window. It also acts as an obstacle to stop intruders from making their way into your home. If the gap is particularly large, you might think about a security door that has an integrated window repairs, as this will offer the best of both worlds.

2. Sagging

uPVC windows and doors are a low-cost energy-efficient, durable and long-lasting alternative to timber sash windows. However, with time, they may be afflicted by a variety of issues, including sagging. A window that isn't properly aligned can cause problems with light, draughts, and even security. If you find that your uPVC window is beginning to shrink, it is important to act swiftly to prevent the problem from worsening.

To fix a sagging window you can try to reposition the hinges. First, you'll need to open the windows so you can reach the frame. Then, you can remove the hinges at the top and bottom with a screwdriver and adjust them counter-clockwise or clockwise. Close your window to test the fit after having moved your hinges. If you're happy with the fit, you can tighten the screws to ensure that they remain in place.

If you are unable to reposition the hinges, you could need to replace the seal. Rubber seals may dry out and lose their elasticity with time, which causes them to loose their elasticity. It is essential to replace your seal as soon as you can in order to ensure that your uPVC window waterproof and draughtproof.

uPVC handles may also loosen. This is usually due to screws that have loosened over time, but it could be due to the handle mechanism getting worn out. It's relatively easy to fix a loose uPVC hand. First, you'll need to close the window and then perform a test to ensure that it fits. The corners of the sash need to be aligned with the casing joint. If it isn't you can use a screwdriver to loosen the handle. Then, turn the mechanism into position.

3. Water Leaks

If you wake up to wet floors and damp walls every time it rains it is important that you take action. Water leaks from windows are not just a cause for degradation of your home's structure but also hamper your efforts to regulate the temperature in your home. Most of the time, uPVC window leaks are caused by a lack or damage to the sealant.

This is a fairly simple fix that can be done by any skilled DIYer. Depending on how serious the problem is, the old caulking might need to be removed. It is important to keep in mind that when it is about uPVC window repairs, you should not be tempted to 'over-caulk in order to make the area more difficult to clean and could reduce your energy efficiency.

Make sure that the drainage holes have no debris in them, and also ensure that the sill pan is angled correctly to drain away from the window. In more serious cases you might need to consider replacing the window.

Mold spots and rotten sills are another sign of water leakage. The fungus thrives in damp conditions and can spread quickly throughout the house.

It is also important to remember that if the leak is coming from between the glass of your double glazed windows, it's more likely to be a problem with the glass seal rather than the frame or sliding. A uPVC specialist can easily fix this problem by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or slack and blow open with ease it could be hinges at fault. They can be easily repaired by any skilled DIYer and can usually be done within a few minutes.

Nearly every home in the UK will have either top hung or side hung uPVC windows that are hinged and, like all mechanical parts, they will wear out over time. It is an easy process, but it's simpler with someone else to help hold the frame in place.

Check that the uPVC hinges open and close in the right direction. This can be done by checking for the arrows on each hinge. This indicates the direction in which the window should open.

The problem with the hinges on windows could be caused by improperly opening the window in a particular manner or because of improper installation in the factory. Sending us a picture via our website is often enough to resolve the problem. We are happy to give assistance.

Regularly lubricating the hinges is also necessary. Applying a light engineering lubricant to the hinges is an ideal method to accomplish this. We recommend using the lubricant that doesn't contain solvents, Window Repairs like 3-in-1 Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It can also prevent corrosion and decrease the chance of sticking. Ideally, you should perform this every year. WD40 and other solvent-based lubricants are not recommended as they will damage parts of your uPVC window.

5. Draughts

Draughts in Upvc windows can be caused by a variety of various factors. The hinges may also become disaligned as a result of wear, causing gaps where the sash and frame meet. These can be easily repaired by giving them a good clean, but when they're beyond repair, it could be necessary to get them aligned or replaced. The interlock, which is on the hinge side of the window and can be misaligned. Again, it's possible to just give them a good clean, but in some instances it could be necessary to have these replaced.

These seals are susceptible to wear and tear or be damaged over time, allowing air to escape. This can be avoided by replacing them with high-quality weatherstripping. Another option is to replace the window with glass that is low-emissivity, which will help regulate indoor temperatures and again will reduce the possibility of draughts.

Lastly, one of the most effective ways to reduce draughts is by using an draught excluder. These are usually fabric tubes filled with some type of filler. They can be positioned on top of your windowsill. They can help keep cold air out and keep your home warm and cozy!

Your windows made of upvc will remain a great source of insulation and security to your home with a little regular maintenance and repairs. It is important to remember that all windows eventually get worn out and it could be cheaper to replace them rather than repair them. If you have any problems with your Upvc window, it's best to consult a professional as soon as you can.