Repairs To Upvc Windows Explained In Less Than 140 Characters

Repairs to uPVC Windows

uPVC windows are an excellent choice for modern homes. They are durable, long-lasting and easy to maintain. In contrast to aluminium and timber, they do not corrosion or rot.

Regularly cleaning and lubricating UPVC windows and doors is vital. This will save you from unnecessary repair costs and improve energy efficiency.

1. Broken Glass

If the glass in your window is broken it can cause a huge deal of damage to your home, making it extremely dangerous and UPVC window repairs possibly fatal. It is essential to make sure that your windows are in good condition.

Single-pane windows are relatively simple to replace and will usually fit into the old frames very easily. However If you have double pane windows that are secured by internal beading, it'll be more difficult to remove the panes that are in place and replace them with new ones. In this situation, you will need to source some plastic spacers that aid the new pane in being able to fit correctly into the frame of the window.

If you are going to attempt to remove the window panes by yourself, it is essential to wear the appropriate safety equipment that includes gloves with a thick layer of material and protective eyewear. It is also an excellent idea to lay down a drop cloth before you start working on the glass, so that any fragments of glass fall onto the fabric instead of landing on the floor, where they could be trampled on and cause further damage.

It's a great idea to seal the gap after the glass is removed. This will stop drafts and water from entering your property until a professional is able to repair the window. This will also act as a barrier, deterring any intruders from getting access into your home. If the gap between the window and the door is large, you might prefer security screens that has an opening. This will provide the best of both.

2. Sagging

Upvc is a long-lasting, energy-efficient and affordable alternative to timber sash window. However, over time they are susceptible to a range of issues like sliding. A window that isn't properly aligned can cause problems with light, draughts, and even security. It's important to take action as soon as you realize that your uPVC windows are sagging.

Repositioning the hinges can help fix a window that is sliding. First, you'll need to unblock the windows so you can get at the frame. Then, you can remove the top and bottom hinges using a screwdriver, UPVC Window Repairs and then adjust them counter-clockwise or clockwise. Close your window to check the fit after you've moved your hinges. If you're happy with the fit, you can tighten the screws to ensure they stay in the right place.

If you cannot reposition the hinges, you may need to replace the seal. Rubber seals can dry out and lose their elasticity with time, causing them to loosen. It is crucial to replace your seal as quickly as you can in order to keep your uPVC window watertight and draughtproof.

uPVC handles may also become loose. Often, this is caused by screws that have come loose over time. However, it can be due to the fact that the handle mechanism has worn out. It's relatively simple to repair a loose uPVC handle. The first step is to close the window and then perform an initial test fit. The joint at the corner of the sash must align with the joint on the casing. If it isn't then you can use a screwdriver or a wrench to loosen the handle, and then reverse the mechanism back into position.

3. Water Leaks

If you're waking up to wet floors and mouldy walls every time it rains it is important that you take action. Water leaks from windows are not just a cause for degradation of your home's structure but also undermine your efforts to control the temperature within your home. Most of the time, uPVC window leaks are caused by a damaged or missing sealant.

This is a relatively easy fix and should be undertaken by any DIY expert. Depending on the severity of the problem the caulking that was used up may need to be removed before a new layer of caulk can be put on. It is crucial to keep in mind that when it comes to uPVC window repairs you should avoid the temptation to "over-caulk and then make the area harder to clean and could reduce your energy efficiency.

Verify that the drainage holes have no debris in them and that the sill pan is properly angled to drain away from the window. In more serious cases you might need to consider replacing the window.

Moldy sills and rotten ones are another sign of water leakage. The fungus thrives in damp conditions and can spread quickly throughout the home.

If the leakage occurs between the double glazed window repairs-glazed glass it is more likely the issue is related to the seal, not the frame. A uPVC specialist can easily solve this issue by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or are loose and open with a breeze It could be hinges that are at fault. Anyone with the skills to fix them can replace the hinges in a matter of minutes.

Almost every household in the UK will have top-hung or side hung uPVC windows that have hinges and, just like any mechanical component they will wear out over time. It's very simple to change the hinges on a window, but it's easier if someone else helps hold the frame.

It is also important to verify that the uPVC hinges are opening and closed in the correct direction. Check for the arrows on each hinge to determine the direction in which the window should be opened.

The issue could be caused either by opening the window incorrectly or by a poor installation at the factory. Sending us a photo via our website will often resolve the problem. We are always happy to offer assistance.

Regularly lubricating the hinges is also necessary. Applying an engineering lubricant that is light to the hinges is a good method of doing this. We suggest using a lubricant that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It can also stop corrosion and reduce the possibility of sticking. It is recommended to perform this every year. WD40 or other solvent-based lubricants are not recommended as they can damage your uPVC windows.

5. Draughts

Draughts can be caused by different causes. Firstly the hinges, again because of wear and tear, can become misaligned, this can cause an opening to appear where the sash meets the frame. They can be repaired by giving them a thorough clean, however when they're beyond repair, it could be necessary to get them re-aligned or replaced. Second, the interlock can also become misaligned. This happens on the hinge's side and may need to be cleaned. In some cases it might be necessary to replace them.

These seals are susceptible to wear and tear or be damaged over time, allowing air to escape. This can be prevented by replacing them with high-quality weatherstripping. Another option is to replace the upvc window with glass that is low-emissivity, which will help regulate indoor temperatures and will reduce the risk of draughts.

The last way to reduce drafts effectively is to use a Draught-exclusion device. These are typically fabric tubes filled with a filler, which can be placed over your window sill. They will keep your home warm by blocking out cold air.

Your windows made of upvc will keep providing excellent insulation and security for your home with regular maintenance and repairs. It is essential to remember that all windows will eventually get worn out and it is more cost-effective to simply replace them rather than repair them. So, if you are having issues with your upvc windows, it's recommended to seek assistance from a professional immediately.