How Saab 9-3 Key Replacement Was Able To Become The No.1 Trend On Social Media

How to Replace the Replacement Key Battery For the saab key battery 9-3

Saab owners have to follow a series of special steps to install an additional ignition key. It requires dealer service with the handheld computer known as Tech-2. Then a new key and transponder must be purchased and programmed to the car.

Make sure to rotate your keys in order to prevent one from wearing out quicker than the other. This will help to keep your keys in perfect condition.

Replacement Case

As opposed to the traditional Saab keys of the past keys, the latest key fobs have electronics inside that make it difficult to duplicate. This has made theft of cars significantly more difficult than it was just a few years ago. But, it has also made replacing lost keys a much more expensive undertaking.

Saab 9-3 owners should have two working keys. It's expensive to replace a lost key because it requires replacing the CIM module, as well as reconfiguring the locking cylinders. Dealers will typically charge $100-$200 for this.

There are options to avoid these high costs. Some parts suppliers will use the code of the spare key to cut a new metal blade for less than the cost of the dealer. The key, however, must be the same as the original one to function properly in your car.

You can also replace the case yourself by following these steps. You'll require a flathead screwdriver and some patience. With the screwdriver you can pull apart the plastic, and then take off the emergency key. Once the case is open, remove all electronics and Saab key fob put them back in your new case. Make sure to insert the correct badge and key back into the case as well.

Replacement Battery

The replacement battery for the Saab 9-3 is a low-cost component that can be replaced quickly and easily. The YouTube video of Cyclone Cyd shows how to replace the battery for the remote fob in just four easy steps. This tutorial can be used for any modern saab key fob, however, the procedure may differ slightly.

The button is normally located just below the saab key replacement bristol logo on the back of the fob. It's usually next to the Saab logo on the back of the fob. Then take an screwdriver with a flat head to insert into the small hole in this button. This should be enough to open the case of the fob to allow you to replace the battery.

After the new battery CR1632 is in place, you can reassemble the remote key fob and then program it to your car. The procedure should take no more than an hour at most. This is a straightforward process that doesn't require any special tools.

If you lose a key the procedure will be somewhat more complex, but it can still be completed. The dealer has to verify the VIN of the car, and then order a replacement key blade and TWICE module with the correct unique code. After that, they will be required to cut the replacement key and then program it with the latest software tool known as MDI.

Key Replacement Fob

The key fob contains a battery that is used to lock and unlock your vehicle. The batteries are able to last for and eventually fail. This is a common problem that happens with all cars and the good thing is that you can change the batteries in most key fobs without having to replace the entire case. You can buy fobs replacements on Amazon that have all the electronics already installed, so you can simply open the case and replace the old batteries. It is important to note that you'll need take out the emergency key first. you can accomplish this by inserting an incredibly small screwdriver with a flat head into the slot that is located in the middle of the case. The case will split as you move the screwdriver around it.

If you're about to replace your keys, ensure that you have spare keys, as this can reduce your total cost by a significant amount. If you have an extra key, you can request the dealer to cut the key and program it for your car. This is much less expensive than buying a new key fob.

It is possible to add a second key to your vehicle even if you don't have one, but it requires a great deal of research and effort. It costs a few hundred dollars to add a second car key. The computer in the vehicle also has to be programmed. Professionals can do this however it's a costly option.

Replacement Ignition

In contrast to the earlier Saab automobiles, the current SAAB 9-3 models use an advanced alarm system that is built on a key code. This means that should you lose only one working key, adding an additional one could be extremely expensive as the car has to have a specific computer module installed, and it also needs to be specifically programmed to accept an additional key. Even dealers can charge hundreds of dollars to program an additional key in the event that they are unable to complete the task.

Dealers will charge you a premium to replace your car's computer (also called the CIM or SAAB twice) in the event that you lose your sole working key. We can reprogram the EEPROM of your car's computer so that it's ready to accept an additional key. This will save you more than 50% on the price you'd have to pay an auto dealer.

If you have owned a 9-3 from SAAB for quite a while and you're aware of the ignition keys are not very durable. They can become extremely sticky, and the buttons can be ripped off from time to time and you should think about purchasing a new one if yours isn't working as it should. The good news is that replacing the ignition key isn't as complicated as it sounds, and it can be done quickly using the right tools.