17 Reasons To Not Ignore Repairs To Upvc Windows

Repairs to uPVC Windows

uPVC windows are a great choice for modern homes. They are long-lasting, durable and easy to maintain. They don't decay or rust as aluminum and timber.

Cleaning and lubricating regularly UPVC windows and doors is crucial. This will save you from unnecessary repair costs and also improve the efficiency of energy.

1. Broken Glass

If the glass in your window has been damaged, it can cause a great amount of damage to your home, which can make it extremely dangerous and possibly fatal. You should take the time to make sure that your windows are in good condition.

For single pane windows, it is relatively easy to replace windows, and the new one will generally fit within the old frame very easily. However when windows with double panes are held in place by internal beading, it will be more difficult to get rid of the old panes and put in new ones. In this case you'll need locate some plastic spacers that will help the new pane to fit perfectly into the window frame.

If you plan to attempt to remove the glass panes yourself it is crucial to wear appropriate safety gear that includes gloves with a thick layer of material and protective eyewear. It is also recommended to lay down a dropcloth prior to you begin working on the window panes, so that any shards fall onto the fabric and not on the floor, where they could be trampled.

It's a great idea to cover the gap with tape after the glass is removed. This will keep drafts and water from getting into your home until a professional arrives to fix the window. It also acts as a barrier, deterring any intruders to gain access to your home. If the distance between the window and the door repair is substantial, you may need to consider an alarm system that includes an opening. This will give you the best of both.

2. Sagging

uPVC windows and doors are a low-cost, durable and energy-efficient alternative to timber windows with sash. However, over time they are susceptible to a range of problems including sliding. A sagging window in uPVC can cause problems with light, draughts and even security. It is crucial to act as soon as you realize that your uPVC windows are falling down.

Repositioning the hinges can help fix a window that is sagging. First, you'll need to unblock the windows to reach the frame. Then, remove both the top and bottom hinges using a screwdriver and adjust them counter-clockwise or clockwise. Close your window to check the fit after you've relocated your hinges. If you're happy with the fit, you can tighten the screws to ensure that they stay in place.

If you are unable to reposition the hinges, you might need to replace the seal. Rubber seals can dry out and lose their elasticity with time, leading them to loosen. If this happens, it's important to replace the seal as fast as you can to ensure that your uPVC windows are watertight and secure from draughts.

UPVC handles can also become loose. This is usually due to screws that have been removed over time, but it can be due to the mechanism of the handle getting worn out. It's a good thing that it's simple to repair a loose uPVC window handle yourself. First, you'll need to close the window repair and perform an experiment fitting. The joints at the corners of the sash should be aligned with the joint on the casing. If it doesn't you can use a screwdriver to loosen the handle. Then, you can turn the mechanism back into place.

3. Water Leaks

It is crucial to take action if you awake each day to find mouldy walls and floors that are wet. The leaks of water through windows could cause structural damage to your home, and hinder your ability to control the temperature inside your home. The most common cause for leaks in uPVC windows is that the sealant around the frame has been damaged or is missing.

This is a simple fix that can be accomplished by anyone who is a DIYer with the skills. Depending on the severity of the problem the caulking used previously may require removal before a new layer of caulk is applied. It is important to remember that when it comes to uPVC window repairs, do not be tempted to apply too much caulk in order to make the area harder to clean and decrease the efficiency of your energy usage.

It is important to check that the drainage holes are free of debris and that the sill pan is angled correctly so that it drains away from the window. In more severe situations, you may have to replace the window.

Mold spots and rotten sills are another sign of water leakage. This mold thrives in damp environments and can quickly spread throughout the home.

It is also important to remember that if the leakage is coming from between the glass in your double glazed windows it may be more likely to be a problem with the glass seal rather than the frame or sliding. This can be easily corrected by a uPVC window specialist who will replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

Hinges may be to blame when your uPVC window is difficult to open or if it opens in the breeze. Any competent DIYer can replace hinges in just a few minutes.

Most households in the UK will have either top hung or side-hung uPVC windows that are hinged and window repairs like any mechanical part they can wear down over time. It's easy to replace a hinge on a window, but it's easier if someone helps hold the frame.

It is also important to verify that the uPVC hinges are opened and closed in the correct direction. You can check this by looking for the arrows on each hinge. This shows which way the window should be opened.

The issue can be caused by opening the window improperly or due to a poor installation at the factory. This can often be resolved by sending us a photograph via our website and we will be happy to give you suggestions.

It is also important to ensure that the hinges are lubricated regularly. Applying a light engineering lubricant to the hinges is an ideal method of doing this. We suggest using the lubricant that doesn't contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication can help the window to operate and close more easily. It can also lower the risk of a window sticking and prevent corrosion. This must be done at a minimum once a year. WD40 or other solvent-based oils are not recommended as they can cause damage to your uPVC windows.

5. Draughts

Draughts can be caused by several different causes. The hinges can also be misaligned due to wear, creating gaps where the sash and frame meet. If they are beyond repair, it could be necessary to have them realigned. Secondly the interlock, this is located on the hinge of the window, can be misaligned. Again, it may be possible to just give them a good clean, but in some cases it might be necessary to have these replaced.

The second most frequent cause of draughts is the window seals. They are prone to wear or damaged over time and let air escape through the gaps. Replacing these with high-quality weatherstripping can help keep draughts at bay. Replace the upvc windows with low-emissivity lenses. This will help control indoor temperatures and lessen the possibility of draughts.

Another, and most effective ways to cut down on draughts is by using a draught excluder, these are typically made of fabric that are filled with some sort of filler and can be positioned on the windowsill on top. These will keep your home warm by blocking out cold air.

With a little regular maintenance and repair windows made of upvc will provide excellent insulation and security for your home. It is essential to remember that all windows eventually wear out and it may be more cost-effective to replace them than to repair them. If you encounter any issues with your Upvc window it is recommended to speak with a professional as soon as you can.