Why Saab 9-3 Key Replacement Will Be Your Next Big Obsession

How to Replace the Replacement Key Battery For the Saab 9-3

Saab owners must follow a set of specific steps to add a second ignition key. This requires a handheld computer, called Tech-2, to be used by the dealer. Then a new key and transponder must be purchased and then programmed into the car.

Make sure to rotate your keys in order to prevent one from deteriorating faster than the other. This will also help keep your keys in top condition.

Replacement Case

The new key fobs for keys are not like the old Saab keys. They're equipped with electronic devices that make it difficult to duplicate. That has made car theft a lot more difficult than it was just a few years ago. It has also made it more expensive to replace Lost saab Keys keys.

Every owner of a saab key programmer 9-3 should have at minimum two working keys. It is costly to replace a lost key because it requires replacing the CIM module, as well as reprogramming the locking cylinders. Dealers charge between $100 and $200 to do this.

There are ways to reduce these costly costs. Some parts suppliers will search for the code on an old key (usually the same one that opens the doors and switches the ignition) and cut a brand Lost saab Keys new metal key blade for just a fraction of dealer cost. The key must, however, be identical to the original one to function properly in your vehicle.

You can also replace the case yourself by following these steps. You'll need a flathead and a lot of patience. Using the screwdriver, slowly tear the plastic away and separate the emergency key from the case. After the case is open, remove all electronics and place them into the new case. Be sure to put the correct key and badge back inside the case, too.

Replacement Battery

The replacement battery for the Saab 9-3 is a cheap part that can be replaced easily and quickly. This DIY video from YouTube user Cyclone Cyd explains how to replace the battery in the remote key fob in just four steps. This guide should work with any modern saab key fob, though the process may vary slightly.

The first step is to find the button that lets off the backup key within the fob. This button is usually on the back of the fob right next to the Saab Logo. Use a flathead to insert the screwdriver in the small hole in this button. This should be enough to open the case in order to change the battery.

Once the new CR1632 battery is in place then you can reassemble your remote key fob and program it to your car. The entire process should not exceed an hour. It's a simple procedure that doesn't require special tools.

If you lose a key, the process will be more complicated however it can be accomplished. The dealer will need to find the VIN number of the car and then order a replacement saab key key blade and a TWICE module with the proper unique code. Then, they'll have to cut the replacement key and then program it with the latest software tool known as MDI.

Replacement Key Fob

The key fob contains an internal battery that is used to lock and unlock your vehicle. The batteries last for a certain time that is a long time, and they eventually go out of service. This is a problem that happens with all cars and the good news is that you can change the batteries in a majority of key fobs and not have to replace the whole case. You can buy fobs replacements on Amazon that have all the electronics already installed, so you can simply open the case and replace the batteries in the original case. It is important to keep in mind that you'll need take out the emergency key first, and you can do this by inserting the small screwdriver flathead into the slot found in the middle of the case. The case will split once you move the screwdriver around it.

When you're ready to replace the keys make sure you have a spare, because this can cut down your total cost by a substantial amount. If you have spare keys, you can ask the dealer to cut an additional key and program it to the car, which is much cheaper than replacing the entire key fob.

It is possible to add a second key to your vehicle in the event that you don't have one, however it requires some research and work. The cost for adding a second key is around a hundred dollars and it also requires the programming of the car's computer. Professionals can accomplish this, but it's an expensive option.

Replacement Ignition

The modern SAAB 9-3 has an advanced alarm system based on a key code. This means that in the event that you lose your only working key, acquiring another one could be very expensive because the car needs to have a computer module added and it also must be specially designed to accept a different key. Most locksmiths can't do this and a dealer will charge several hundred dollars just to program the new key!

Dealers will charge you the highest price to replace your car's computer (also called the CIM or SAAB twice) If you lose your only functioning key. We can reprogram the current EEPROM in your car computer to be ready to accept an additional key. This will save you more than 50% of the cost you have to pay an auto dealer.

If you've been a faithful owner of a 03-11 SAAB 9-3, you probably know that the ignition key isn't the most durable. They can be extremely sticky, and the buttons are known to fall off occasionally It is recommended that you consider purchasing a new one if yours isn't working as it should. It's not as difficult as you think to replace the ignition key. With the proper tools, it can be accomplished quickly.