14 Common Misconceptions Concerning Double Glazing Door Lock Repairs

Double Glazing Door Lock Repairs

Have you noticed that your uPVC window or door mechanism started to fail? Maybe the handles on your uPVC windows and doors aren't aligned correctly or are difficult to use.

It is crucial that your double-glazed doors work smoothly, otherwise you'll be wasting energy and increase the chance of burglary. Owen the Locksmith can fix your door lock at an affordable price.

Snapped Key

It can be frustrating when a key gets stuck into the lock. It also poses a security risk, as the door may not be locked and could leave you vulnerable to intruders. There are a couple of quick fixes you can make to repair the issue and make your door functional again.

Be calm. If you panic you could end up pushing the broken key further into the lock.

Next spray WD-40 or another penetrating oil into the lock to aid in making the broken piece slip out more easily. You can also use the screwdriver to break up any pieces that are stuck. If you're fortunate enough to have a small piece of the key left hanging out it, you can make use of a paperclip or other metal object with a thin surface to grab it and pull it out. Both methods work well, however, be cautious not to push the damaged piece of the key further into the keyway.

Some paperclips have grooved edges that can be used as hook extractors and Jigsaw blades can also be used for this purpose. If you do not have any of these handy, you can make use of needle-nose pliers that bend to create a hook. Additionally, a pair of tweezers is a good way to grasp and pull out the remaining bit of the broken key.

If you are unable remove the broken piece of key then you can use a lock deicer. It is found in most hardware stores, and it is used to freeze any moisture or double Glazing Repair ice that might be inside the lock.

If none of these solutions work, it may be time to call a locksmith. Fitlocks experts can quickly resolve issues with uPVC door locks and mechanisms that have snapped keys as well as broken handles. They can also reconfigure the double glazing door mechanisms to ensure that they are more easy to operate. Book a double glazing repair via our website, or give us a phone call to discuss your requirements.

Broken Cylinder

A broken cylinder is an extremely risky security issue. A professional locksmith is able to fix the cylinder. To fix the cylinder, a locksmith will need to tap it. This can be accomplished with a hammer, or any other tool. However, the most effective method is to use a wire or a long match. Then, position the match's end or wire close to the keyway. After this, the locksmith will hit the lock to break it open. This is much safer than using a hammer that could damage the lock.

The most frequent cause of cylinder head cracks is overheating. This can happen when the cylinder block as well as the cylinder head are made of different metals, like cast iron and aluminum. Different metals can be heated and cool at different rates. This could cause localized hotspots to expand quicker than the rest.

Corrosion can be a cause of cylinder fractures. When the cylinder head and the cylinder block aren't maintained properly, this could lead to rusting or corrosion and cause them to expand at a higher rate than they ought to. In time, this could also cause cracks.

If your uPVC window replacement near me or door lock is stiff or requires lots of pressure to turn, it could be due to many things. This issue could result from a defective locking mechanism or misalignment, and also a worn out handle.

This is a simple and inexpensive fix that most homeowners with double glazing can perform. A professional locksmith is able to solve the issue within one hour of arriving at the property. Depending on your needs they will be able to replace the locking mechanism, change the window handles, and also change the gearboxes. A professional locksmith will be able to provide you with a recommendation of the most cost-effective solution for your home. They may suggest upgrading to 3 Star TS007 Euro Cylinders which provide an additional layer of protection from burglars. It's a small price to get the peace of mind that comes from knowing that your uPVC door is secure.

Broken Handle

It's not a surprise that window handle locks may break. They have complex mechanisms which deteriorate over time. It isn't always easy to pinpoint the reason behind a broken window handle lock and repair it correctly.

Fixing your broken handle, whether it's the internal latch or locking mechanism, will improve the security of your uPVC door and reduce the risk of draughts. It can be expensive to repair or replace your handle if it is not done correctly and could also harm the frame and the lock of your door.

Screwdriver: With the window open, loosen the screw holding the handle. The screw should be on the inside of the back plate, normally covered by a screw cover for aesthetic reasons. Be careful not to damage any of the internal components within the handle, like the plates or levers on either side of the spindle. Keep them in the same arrangement to make it easier to replace them if needed.

Then, with a second screwdriver take the screw off that connects the handle to the spindle at the back. Once the screw is loose, you should be able to pull the handle off and pull off the damaged spindle. Replace it with a brand new spindle, making sure it's the same length (you can find them online or at hardware stores). Securely screw it into the correct position. Don't over tighten the screw as this could cause damage to the handle and window frame.

Make sure the new handle is fitted Close the window and test the handle. Hopefully, it will work smoothly and you'll be able to open your window once more.

While you're working on the handle, don't forget to check your uPVC windows are shut correctly. If they're not closing properly, you could experience damp and draughts in your home as in addition to compromising the efficiency of your home's energy usage. Core Sash Windows is a local window company that can alter the hinges of the window frames to ensure they close properly.

Broken Spindle

It is more likely for the spindle to break rather than the handle. This is especially frequent in uPVC tilt and turn windows. These kinds of windows require a handle that is a lock mechanism that is located in the window frame. The handle is attached to a centre rod that triggers a set of mushroom-like locking cams, these locks are inserted into the window frame. If the dead latch mechanism is not able to open when the handle is turned, it is most likely the spindle is broken. This can be a problem that is frustrating.

Luckily there are options to fix this problem. A reputable locksmith can swiftly and efficiently fix this problem. A reputable locksmith will be able to disassemble the window's handle using a tool to remove the wheel portion where the spindle is located. This can be done without causing any damage to the handle or causing any other damage to the frame of the window.

After the wheel has been removed, the technician can inspect the spindle to determine what has caused it to break. This involves breaking down the spindle into its component parts and double glazing repair meticulously noting their general condition as well as any specific areas of damage or excessive wear. This process is typically carried out in a clean, well-lit room by highly skilled technicians.

Then, clean the damaged spindle. This will help remove any debris or dirt that may be obstructing it from operating normally. After that the spindle is cleaned, it could be repaired or replaced. If the technician is replacing the spindle, it is possible to use a dowel that is similar in size to the original. Then, he will drill holes that are identical to both pieces. This will ensure that the spindle will fit perfectly with the handle.

If the spindle that is damaged is beyond repair, it may be necessary to replace it completely. Home centres sell generic substitutes however if your window design is unique then you'll need to contact an expert in cabinet making or woodworking who can replicate the exact component. Once the new spindle has been installed it can be positioned to the handle by line up the holes for screws in the handle with the frames existing screws. Once the handle is firmly set, you are able to operate your uPVC windows.