A Time-Travelling Journey What People Said About Repairs To Upvc Windows 20 Years Ago

Repairs to uPVC Windows

uPVC is an excellent option for modern homes. They are easy to maintain and durable, as well as long-lasting. As opposed to aluminium and timber they do not get rusty or decay.

Regularly cleaning and lubricating UPVC windows and doors is vital. This will save you from unnecessary repair costs and also increase energy efficiency.

1. Broken Glass

If the glass in your window is damaged, it can cause a great amount of damage to your home, which can make it very hazardous and possibly fatal. It is essential to make sure that your windows are in good shape.

For single pane windows it can be relatively simple to replace windows, and the new one will generally fit within the frame that was previously installed easily. However, if windows with double panes are held in place by internal beading, it'll be more difficult to get rid of the existing panes and install new ones. In this situation, you will need to source some plastic spacers that help the new pane to fit correctly into the frame of the window.

Wearing protective eyewear and thick gloves is essential for anyone who plans to remove the glass by yourself. It is also an excellent idea to lay down a dropcloth before you begin working on the glass so that any shards will fall on the fabric instead of landing on the floor where they can be trampled upon and cause further damage.

It's a great idea to seal the gap after the glass is removed. This will stop drafts and water from entering your property until a professional arrives to fix the window. It also acts as a barrier, deterring any intruders from gaining entry into your home. If the gap is large, you might be interested in the security door with an integrated window, as this will offer the best of both worlds.

2. Sagging

uPVC windows and doors are an affordable energy-efficient, durable and long-lasting alternative to timber sash windows. However, over time, they can suffer from a variety of issues like sagging. A sagging window in uPVC can cause issues with light, draughts and even security. If you notice that your uPVC window is beginning to lose its shape, it's important to act quickly to stop the issue from getting worse.

To fix a sagging window you can try to reposition the hinges. To accomplish this, you'll need to open the window so that you can access the frame. Then, remove both the hinges on the top and bottom using a screwdriver, and then adjust them clockwise or counter-clockwise. Close your window to check the fit after you have relocated your hinges. If you're satisfied with the size of the window repair near me, tighten the screws to keep them in place.

If you cannot reposition the hinges, you might need to replace the seal. Rubber seals can dry out and lose their elasticity over time, causing them to lose their tightness. If this happens, it's crucial to replace the seal as soon as possible so that your uPVC windows remain watertight and safe from drafts.

uPVC handles may also become loose. This is often caused by screws that have become undone over time, but it could be due to the mechanism of the handle wears out. It's a good thing that it's simple to repair a loose uPVC window repair near me handle yourself. First, you'll need to close your window and do an experiment to ensure that it fits. The corner joints of the sash must align with the casing joint. If it doesn't you can use a screwdriver to loosen the handle. Then, you can turn the mechanism into position.

3. Water Leaks

It is crucial to act if you awake each day to discover mouldy walls and wet floors. Water leaks from windows can not only cause degradation of your home's structure but also undermine your efforts to control the temperature within your home. Most of the time, uPVC window leaks are caused by a damaged or missing sealant.

This is a relatively easy fix that can be done by any competent DIYer. Depending on the severity of the problem the caulking that was used up may need to be removed before a new layer can be put on. It is essential to remember that when it is about uPVC window repairs, do not be tempted to 'over-caulk' as this will only make the area more difficult to clean and reduce your energy efficiency.

Verify that the drainage holes are free of debris in them, and also that the sill pan is properly angled to drain away from the window. In more severe situations, you may have to replace the window.

Other signs of long-term water leakage include sills that are rotten and the appearance of black spots of mold on the walls near the window. The is a fungus that thrives in damp conditions and can quickly spread across the home.

It is also important to keep in mind that if the leak originates from the glass of your double glazed windows, it's more likely to be a problem with the glass seal, rather than the frame or sliding. This can be easily repaired by a uPVC window specialist who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

Hinges may be to blame for the reason that your uPVC window is difficult to open or it blows open with a breeze. They can be replaced by any competent DIYer and can usually be done within a few minutes.

Nearly every home in the UK will have either top hung or side-hung uPVC windows that use hinges and like any mechanical part they are susceptible to wear and tear over time. It is essentially a very simple procedure, but it is simpler when you have a person to help hold the frame in place.

It is also worth checking that the uPVC hinges are opened and closed in the correct direction. You can check this by looking for the arrow on each hinge. This indicates which way the window should open.

The problem with the hinges on windows could be the result of incorrectly opening the window a certain way or due to improper installation in the factory. This can often be resolved by sending us a photograph through our website and window repairs we will be happy to give you advice.

It is also important to grease the hinges on a regular basis. This can be done by applying an oil that is light in nature to the hinges. We recommend using a solvent-free lubricant, such as the 3-in-one Multi-Purpose oil. Regular lubrication can allow the window open and close more easily. It can also reduce the possibility of a window sticking and help prevent corrosion. The ideal time to do this once a year. WD40 and other solvent-based lubricants are not recommended as they can damage the parts of your uPVC window.

5. Draughts

Draughts can be caused by several different factors. Firstly the hinges, again due to wear and tear could become misaligned. This causes an opening to appear between the sash and the frame. If they are beyond repair, it may be required to realign them. Secondly the interlock, this is on the hinge side of the window, may be misaligned. Again, it is possible to just give them a good clean, but in some cases it might be necessary to have them replaced.

The next common reason for draughts are the window seals, these are susceptible to being worn out or damaged over time and let air escape through these gaps. Replacing these with high-quality weatherstripping will help to stop draughts. Another option is to replace the window with low-emissivity glass, which will help regulate indoor temperatures and will reduce the possibility of draughts.

Another method of reducing the amount of draughts is to use a Draught-exclusion device. These are typically fabric tubes filled with a filler that can be hung over your window sill. These will help to block out cold air and keep your home warm and cosy!

With a little regular maintenance and repair your windows made of upvc will provide a great level of security and insulation for your home. It is essential to remember that all windows eventually get worn out and it is more cost-effective to replace them than to repair them. If you encounter any issues with your Upvc window you should consult a professional as soon as you can.