The Three Greatest Moments In Ghost Immobiliser 2 History — различия между версиями

Текущая версия на 12:11, 29 марта 2024

Ghost Immobiliser 2

Guards your vehicle from key cloning, and stops thieves from driving it with original keys. Our latest immobiliser is connected to the CAN data network in your vehicle and a unique pin must be entered to begin the engine.

Ghost, unlike trackers, does not emit radio frequency signals and cannot be identified by diagnostic tools. It does not have any LED indicators or buttons that would signal its presence in your car or van.

Anti-key cloning

The ghost immobiliser has been designed to stop key cloning and hacking. This device connects to the CAN data network of your vehicle and creates an unique pin code push sequence using the buttons from the factory on your dashboard and steering wheel. This prevents the thief being able to start your vehicle. If the incorrect PIN is entered, it will stop your engine from starting which makes it impossible to leave with your joy and pride.

A ghost immobiliser is a new technology that is extremely hard for thieves to defeat. In contrast to physical deterrents such as wheel locks and steering locks that can be cut or taken The Ghost immobiliser Installation immobiliser is a discrete electronic device that isn't detected by common thieves since it doesn't emit any radio signals and works silently.

The next generation of immobilisers are equipped to shield your car from a range of threats like keys that are duplicated, key-hacking, and relay attacks. It can also stop a thief adding a key or replacing your ECU because it won't permit them to start your vehicle without entering the correct PIN code.

Contrary to other immobilisers, the ghost immobiliser 2 doesn't require a key fobs or remotes for operation. It is able to be deactivated from the driver's phone by using a simple app. This is ideal when you need to give your car away for valet parking, or maintenance without keys.

The Autowatch Ghost 2 immobiliser-II is the latest evolution of our ground-breaking ghost immobiliser. It is designed to be easy and convenient to use while remaining as secure as possible. This is achieved by connecting the Ghost-II with the vehicle's CAN data network. This means that there are no wires that are able to be hidden or easily found. It also comes with a built-in feature that allows you to disable your Ghost-II by simply connecting to the vehicle's Bluetooth and you'll be able to enter and drive without any hassle.

OBD port hacking

OBD port hacking is the latest method used by professional car thieves. Thieves are able to access your vehicle's OBD with an laptop, mobile application, and cables that can be bought on the internet for less than PS50. Once they have access to your vehicle's OBD port, they can do whatever they like, from resetting fault codes and tuning your vehicle to stealing your pride and joy in just a few seconds.

If you have an Ghost immobiliser fitted it can stop your car being stolen using this method by requiring that a unique PIN code sequence is entered on your key fob to start the engine and drive away. It does this by interacting with the vehicle's ECU (Engine Control Unit) on the CAN Data circuit, and is completely undetectable to any code grabbing or RF scanning technology. It also includes a Service/Valet mode that allows your vehicle to be started without the need for a PIN code.

To utilize an OBD hacking device, you'll require a laptop with software capable of interpreting the OBD protocol. These can be bought for less than PS100 on ebay or Amazon. You will also require a cable that has OBD pins connected to the CAN Bus. These cables can be purchased on Amazon/Ebay around PS50. You then need to splice the cable into the wiring harness of your car for example, in the radio wiring harness.

Once the hacker gains access to the OBD port of your vehicle, they can send diagnostics to the system with high baud rate that will cause a crash of the car's CAN, and prevent the system from functioning. This can cause the engine to stall and doors to lock, or even the brakes to be engaged.

No additional key fobs or remotes are required.

An immobiliser for your car is a fantastic piece of anti-theft technology that is used by millions of modern vehicles all over the world. An aftermarket immobiliser safeguards your vehicle with engine ECU software that stops cars from starting when the transponder is false.

However, it can be easy for a thief to get around an immobiliser system when they have access to the code to deactivate it. The battery in most key fobs can be removed by prying it open and a burglar can make use of a simple tool to remove the immobiliser's inner circuit board and replace it with the blank. They will then be able start your car.

The TASSA approved Ghost 2 is an immobiliser that doesn't require additional keys or remotes. The immobiliser communicates directly with the vehicle's ECU (Engine Control Unit). This is done through a discrete, silent CAN data loop that cannot be detected by diagnostic tools, such as the ones used by high-tech thieves. It also does not use a traditional key-fob with LED indicators, so it can go undetected in plain sight.

You may need to deactivate Autowatch's Ghost 2 auto protection at times like valet parking or a service. Ghost CAN immobilisers come with a feature called 'Service Mode,' which is activated with a simple push of a button on your phone. The car is still operated, but the maximum speed is limited to 36mph for added security.

Contact us today to schedule a demonstration at our workshop. A member of the team will run through the entire process of how the system works and provide you with owner's manuals, installation certificates, Ghost 2 emergency card and security assurance.

Simple process to change the PIN code

Ghost is the next-generation device that secures your car without cutting wires, or installing aftermarket key fobs. It is directly connected to the vehicle's CAN data network, and a unique PIN code is programmed in it using buttons on your steering wheel & the dash. The device does not emit RF signals, so it is not able to be tampered with. This makes it undetectable by sophisticated scanning or code grabbing techniques that modern thieves employ.

The PIN code is able to be changed to lock out previous drivers or even include an override number if you forget the sequence. The installer will show you the procedure to accomplish this during installation. The system comes with a valet-mode feature that allows you to temporarily disable pin input sequences so that the garage or mechanic can work on the vehicle without knowing the code. This is great for customers who want to hand over their car for valet parking / service but don't want to divulge the pin sequence.

Ghost is an unobtrusive system that utilizes the buttons on your car to create a unique and interchangeable PIN sequence. This sequence is entered using the smartphone app, meaning no extra LED indications are displayed and your vehicle is protected with no risk of being disabled by hackers or other technology.

Every vehicle is tested

Contrary to key fobs which require you to press buttons on them, a ghost immobiliser is discretely placed under your dash or steering wheel so that only you know that it's there. The device is connected to your vehicle's CAN network and a PIN code can be programmed using buttons on your vehicle. The system then prevents your engine from running until this code has been entered prior to. This means that thieves are unable to clone the keys of your car or use the OBD to hack into it.

Ghost is a great option for all vehicles, Ghost Immobiliser Installation including electric cars motorhomes, vans, and bikes. Ghost is also extremely flexible and can be programmed to turn off in a variety of situations. It can be programmed to enter Valet mode, for example when your vehicle is transferred to a valet service or parking company. This permits you to drive your vehicle within a 30mph speed limit, and the ghost immobiliser will turn on itself when the vehicle returns to your possession.

The device can be reset at any time to your personal PIN number. This is useful in the event that you forget your code or the device becomes inoperable, meaning that it's effectively as good as new again.

The device is also completely inaccessible to anyone who doesn't even know what it is. It works by running through the buttons on the dashboard of your car and on the steering wheel and uses the data they send to determine which button has been activated. This makes it a secure and reliable security system that cannot be manipulated by RF scanning or jamming, or a door lock pick set.