Twenty Myths About Ghost Immobiliser 2: Busted

Ghost Immobiliser 2

Guards your vehicle from key cloning and prevents thieves from driving your vehicle with original keys. Our most recent immobiliser connects to the CAN data network of your vehicle and a unique PIN has to be entered in order to start the engine.

Ghost unlike trackers, doesn't emit radio frequency signals, and therefore cannot be detected by diagnostic tools. Ghost doesn't have LED indicators or buttons that would indicate its presence in your vehicle or van.

Anti-key Cloning

The Ghost immobiliser was developed to stop key cloning. This device connects with your vehicle's data network CAN, and creates a unique pin number using the factory buttons on your dashboard and steering. This prevents the thief being able to start your vehicle. If the incorrect PIN is entered, it will stop your engine from starting, making it impossible for you to drive away with joy and pride.

Ghost immobilisers use new technology that is very difficult for thieves to beat. The ghost immobiliser is different from physical deterrents like wheel locks and steering lock that can be cut, is a discrete electronic device. It can't even be recognized by thieves as it does not emit radio signals and functions in a quiet manner.

The next-generation immobiliser protects your car against a variety of threats, including key-hacking relay attacks, key hacking and duplicate copies. It also has the ability to stop thieves from acquiring a new key or wiki.gptel.ru replacing your ECU by ensuring that it does not allow the vehicle to start without entering the correct PIN code before entering.

The ghost immobiliser cost immobiliser 2 unlike other immobilisers, does not require the use of a remote control or key fob to operate. It can be turned off using an app on the smartphone of the driver. This makes it perfect for those occasions when you have to give your car over for valet parking or servicing without keys.

The Autowatch Ghost-II represents the latest version of the Ghost immobiliser. It was designed to be as simple and user-friendly as it is possible, while remaining as secure as ever. This is accomplished by integrating the Ghost-II with the vehicle's CAN data network. This means that there aren't any wires that are able to be hidden or easily found. It has built-in features that allow you to disarm the Ghost-II simply by connecting to the vehicle's Bluetooth.

OBD port hacking

OBD port hacking is a new technique being used by professional car thieves to steal cars. Thieves have access to your vehicle's OBD port with little more than a laptop, an app and a few cables that can be bought online for less than PS50. Once they have access to your vehicle's OBD port, they can do whatever they want, from setting fault codes, and tuning your vehicle to taking your joy and pride away in just a few seconds.

It will protect your car from being stolen by requiring a specific PIN sequence to be entered in conjunction with your key fob prior to you can start the engine or drive away. It communicates with the vehicle's ECU (Engine Control Unit) via the CAN Data Circuit. This is undetectable by any scanning technology, RF or code grabbing. It even has a Service/Valet mode which allows your vehicle to start without the need for a PIN code.

To utilize an OBD hacking device, you'll must have a laptop with software capable of reading the OBD protocol. These can be purchased for under PS100 on ebay or Amazon. You'll also require a cable that has OBD pins connected to CAN Bus. These cables can be bought on Amazon/Ebay around PS50. The next step is to connect the cable into the wire harness of your car for example, in the radio wiring harness.

Once the hacker gains access to the OBD port on your vehicle, they will send diagnostics to the system using high baud rate which can cause a crash to the car's CAN, and prevent the systems from working. This can cause the engine to stop, doors to lock and even the brakes to engage.

No remotes or keys required

The car immobiliser is a fantastic piece of anti-theft technology that is used by billions modern vehicles across the globe. An aftermarket immobiliser safeguards your vehicle by using engine ECU software that stops vehicles from starting when a false transponder is transmitted.

It is possible for a thief in the event that they have the code to disable an immobiliser, and bypass it. A burglar can easily remove the battery from most key fobs by squeezing them open. They can then use a simple tool in order to remove the internal circuit board from an immobiliser and replace it with a blank. They'll then be able to start your car.

The TASSA approved Ghost 2 is an immobiliser that doesn't require additional keys or remotes. The immobiliser connects to the engine ECU (Engine Control Unit) through a discreet, silent CAN data circuit that is undetectable with diagnostic tools like the ones used by high-tech thieves. It does not also make use of a traditional key-fob that has LED indicators, so it's not visible at sight.

You may have to turn off Autowatch's Ghost 2 auto protection at times like valet parking or a service. The ghost CAN immobiliser has a dedicated mode to do this, referred to 'Service Mode that can be activated with the touch of an app on your phone. The car can still be operated however, its maximum speed will be restricted to 36mph for greater security.

Contact us today to set up an appointment for a demonstration in our workshop. A member of our team will give you the entire process of how the system works and will provide you with owner's manuals, installation certificates, Ghost 2 emergency card and a security guarantee.

Simple PIN code Change Process

Ghost is a next-generation device that secures your vehicle without cutting wires or adding aftermarket key fobs. It is directly connected to the vehicle's CAN data network and a unique PIN code is programmed into it via buttons on your steering wheel and dash. The device does not emit RF signals, so it is unable to be manipulated. This makes it unrecognisable by sophisticated scanning or code grabbing technology that modern thieves employ.

The PIN code sequence can be changed whenever you wish to block previous drivers and even includes an override option in the event of forgotten sequences. The installer will guide you through the process to do this during installation. The system also comes with a valet mode feature which can be used to temporarily disable the pin input sequence so that your garage or mechanic can repair the vehicle without needing to know the pin code. This is a great option for customers who don't want their pin number to be revealed but still wish to leave their car with valet parking or service.

Unlike Thatcham products which require additional key fobs to operate, Ghost is a discreet system that makes use of the buttons inside your vehicle to create a unique interchangeable PIN code sequence. The sequence is entered via the app for smartphones, meaning there are no additional LEDs displayed and your vehicle is secure and safe from the possibility of being disabled by hackers or any other technology.

Tested for every vehicle

A ghost immobiliser, unlike key fobs that require you to press buttons, is discretely installed under the dash or steering wheel. It is not obvious that it's there. The device is connected to the CAN network in your vehicle and a PIN number can be programmed using the buttons on your vehicle. The system will not allow your car to start until the code is entered. This means that thieves can't clone your car's existing keys or gain access to the OBD port to hack into your vehicle.

Ghost can be used in all vehicles, including electric cars, vans, motorhomes and bicycles. It's also extremely versatile and can be set to disable in a variety of situations. It can be programmed to enter Valet mode, for instance, when the vehicle is transported to a valet company or parking company. This permits you to drive within a speed limit of 30 mph and the ghost immobiliser will start to activate itself when the vehicle returns to your possession.

Another excellent feature is that the device can be reset to your personalised PIN code at any point. This is useful when you forget the code or the device ceases to function and is just as good as new.

The device is also completely inaccessible to anyone who doesn't even know what it is. It does this by analyzing the buttons on your dashboard and steering wheel and then using the information they send in order to identify which button was pressed. This makes it a secure and reliable security system that isn't affected by jamming, RF scanning or door lock pick sets.