10 Facts About Double Glazing Lock Repairs That Can Instantly Put You In A Positive Mood

Double Glazing Lock Repairs

Quality locks on your windows and doors can stop burglars from getting into your home. They generally don't like breaking glass or squeezing through windows that are open.

Certain double glazing owners however, have experienced problems with their door or window lock following the installation. These issues can usually be solved without the need for new double glazing.

Broken or damaged locks

If your upvc door repairs near me window or door lock is damaged or defective, then a locksmith can fix it. They can repair hinges, striker plates and locks for your double-glazing. They can also adjust the cylinder's position to correct any misalignment issues which could cause your handle to not operate correctly.

The mechanism might be jammed if the key fits in the lock, but it does not turn or be difficult to insert. This can be due to dirt or grime accumulating in the mechanism. If this is the case, it may be possible to clean the lock and then lubricate. Make use of a dry lubricant, such as graphite or teflon and not oil, as oil attracts dirt and cause it to stick to the inside of the mechanism. After lubricating the lock you need to insert the key and then try to turn it. The lubricant will work its way through the mechanism and the lock should be able turn with ease.

Screws that are loose within the lock mechanism are another reason for a malfunctioning lock. They can become loose and fall out or even break completely preventing the lock to work properly. The screws can be tightened using a screwdriver, but you must be careful not to overtighten them. This can damage the internal components.

A broken lock can be dangerous for both you and your family, especially if you have young children. It's possible for them to open the door without your knowledge and handle allow them access to your home. If you're concerned about this happening, a locksmith who is vetted can provide rapid and effective service to re-secure your double glazing doors.

Misty Glaze are a professional uPVC and double glazing company in Lancing and can repair any type of defective and damaged mechanisms, handles, cylinders and lock systems for both uPVC windows and doors. We can also modify the locking system of your uPVC windows or double glazing to meet your needs. This means that replacement windows and doors are not always required.

Broken or Faulty Handles

As part of their overall security package many double-glazed windows have a multipoint lock. This is an excellent option for those who are concerned about opportunistic burglars trying to gain entry into their home. Ask your installer about antilift blocks. These can be installed in addition to existing locks and can aid in keeping your windows shut.

It's not uncommon for the handle locks to become damaged or even fail - they are the first part of your window that will be forced open by criminals intent on breaking into. The good news is that this is among the easiest parts to fix.

Modern uPVC and aluminium handles feature a multi-point locking system known as Espagnolette which is designed to withstand forced entry. This security upgrade is offered as an option on new uPVC windows. Older uPVC and aluminium handles can be upgraded to lock systems that shoot bolts, again as an optional feature on all new double-glazed windows.

When a handle is faulty it is essential to get the handle repaired as quickly as possible. Faulty handles can prevent the window from closing correctly and letting in a draft. It could also be a weakness that opportunistic thieves could exploit and put your family's possessions and your personal belongings at risk.

The process of fixing the malfunctioning mechanism begins by getting access to the window frame and removing the broken handle. The gearbox that opens the handle is then removed and the type of gear is identified so a replacement can be found that matches the profile of the internal window frame mechanism.

After the mechanism has been replaced, the handle can be fixed using the original screws however, we usually recommend replacing them with longer ones since this will provide the most secure fit. The final stage is to apply a coat of clear sealant to protect the handle from further corrosion. After that the window will be fully operational again, and at a fraction of the cost of replacing the entire window.

Broken or damaged hinges

If your windows do not close properly, you could suffer from draughts or the weakening of your home's security, and an increased risk of water or damp damage. Broken or defective window hinges are a common problem that can be fixed easily.

If your uPVC windows don't open or close and close, it's likely the hinges need to be replaced or repaired. While a lot of window companies require you to purchase a whole new window to fix this simple problem, we're able to replace the hinges that are damaged and save you money.

Window hinges are often damaged through repeated use, or weakened over time by corrosion. If you have a broken window hinge, it's crucial to take the necessary precautions to prevent further damage. This includes not forcing the window repair to close or open.

Knowing the type of hinge you have will help you locate the correct parts to fix it. Maco, Mila and Roto are all brands of window hinges. It is recommended to consult an expert in this situation to ensure that you don't make the mistake of purchasing parts that aren't compatible with your existing hardware and could cause further damage.

The hinges that are not working properly can cause major issue for your uPVC window and doors. They can be a major source of noise, and they can also allow water infiltration which can damage your windows.

To fix this issue, first check whether the pin barrel on both hinge halves is aligned. If not tapping the headpin, use a hammer in order to make an incline in the hinge barrel. This will help keep the pin in place. Ask a friend to hold the doors while you take off hinge screws and hinges. Replace the hinges with those that are of the same size, and then attach the screws using glue. Finally, secure the hinges with clamps or weights until the glue sets.

After your hinges have been repaired and repaired, you should be able to put back the door and attach the handle. It is a good idea to replace the screws using the same length of dowels as the screw that was originally used so that they are in line with each other.

Broken or Faulty Glass

uPVC Windows can become damaged in time, despite the fact they are extremely effective in keeping cold out and keeping heat. This can include broken or damaged glass, as well as faulty locks. This is an issue that can be costly should it be not addressed. This can also detract from the appearance of your home and can lead to a loss in insulation. It is essential to repair any damage immediately.

If your glass is broken but isn't shattered it is possible to fix it yourself using the appropriate tools and techniques. Make sure the area around the glass that has been broken is free of debris so that any fragments don't cause injury or trip hazards. Remove all broken glass pieces and dispose of them in the proper manner. Then, put masking tape over the entire area to stop shards from scattering and sticking to your skin when you move them. Pre-fitting the glass pane prior to gluing it in place is an ideal option in the case of a window that has two panes. This will ensure that you have enough room to finish your project.

Use a dry, clean cloth to clean the glass's surface and the frame prior to applying the glue. Follow the directions for application and curing that can differ from product to product. Depending on the direction of the crack, you may want to clamp the glass in place during the curing process with lightweight clamps designed to hold fragile materials.

After the adhesive has fully cured, carefully reinstall the glass in the window frame, ensuring it's flush with the edges of the frame and that there are no gaps between the glass and the window sash. Be careful not to bend the window as it's being put back in place, as this can weaken the seal and cause water infiltration and condensation.

If you have a glass window that is broken completely or has bigger cracks, consult a professional glazier such as O'Brien(r) to organise a replacement. Leaving broken glass unattended can cause danger to pets and children It's therefore essential to act swiftly.