10 Myths Your Boss Has Concerning Repairs To Upvc Windows

Repairs to uPVC Windows

uPVC is an excellent option for modern homes. They are easy to maintain and double glazed window repairs near me are durable and long-lasting. They are not susceptible to get rotten or rusty like aluminum or timber.

Cleaning and lubricating regularly UPVC windows and doors is essential. This will reduce unnecessary repair costs and improve energy efficiency.

1. Broken Glass

The damaged glass in your windows can cause significant damage to your home and even be fatal. It is essential to ensure that your windows are in good condition.

Single-pane windows are relatively easy to replace, and they generally fit into frames of the past easily. If you have Double glazed window Repairs near me-paned windows which are held together by internal beading, it will be more difficult to remove and replace the panes that were previously in use. In this instance you'll need to locate some plastic spacers that assist the new pane to fit perfectly into the window frame.

Wearing eye protection and heavy gloves is a must for anyone who plans to remove the glass yourself. It is also recommended to lay down a drop cloth prior to when you begin working on the glass to ensure that any shards fall onto the fabric rather than on the floor where they could be trodden under and cause further damage.

Once the glass has been removed, it's a good idea to seal the gap with clear packaging tape or duct tape to prevent water and drafts from getting into the property until a professional can come out and fix the window. This will also act as a barrier that will prevent any intruders from gaining entry to your home. If the gap between the window and the door is large, you might want to use security screens that includes windows. This will give you the best of both.

2. Sagging

uPVC is a durable and energy efficient alternative to timber sash window. However, over time, they may be afflicted by a variety of issues, including sagging. A sagging window can cause problems with light, draughts and even security. If you notice that your uPVC window is beginning to sag it is important to act swiftly to prevent the problem from becoming worse.

Repositioning the hinges could aid in fixing a window that is sagging. To accomplish this, you'll have to open the window to access the frame. Then, you can remove the top and bottom hinges with a screwdriver and adjust the hinges clockwise or counter-clockwise. Close your window to check the fit after you've moved your hinges. If you are happy with the fit of the window, tighten the screws to hold them in place.

If you are unable to move the hinges, you might need to replace the seal. Over time, rubber seals lose their elasticity and become dry and cause their tightness to decrease. If this happens, it's important to replace the seal as fast as possible to ensure your uPVC windows are waterproof and secure from draughts.

uPVC handles may also loosen up. Most often this is due to screws that have become loose over time. However, it can occur because the handle mechanism has worn out. Luckily, it's not difficult to fix the handle of a window that is loose yourself. First, you'll need close the window and then perform an initial test to ensure that it fits. The joint at the corners of the sash should be aligned with the joint on the casing. If it does not then you can use the screwdriver to loosen up the handle. Then turn the mechanism to position.

3. Water Leaks

If you wake up to wet floors and mouldy walls each time it rains, it's important to take action. The leaks of water through windows could cause structural damage to your home, and affect your ability to regulate the temperature of your home. The most common reason for leaks in uPVC windows is that the sealant surrounding the frame has been damaged or double glazed window repairs near me missing.

This is a simple fix that can be accomplished by any DIYer who has the ability. Depending on how serious the issue is, the old caulking may have to be removed. When it comes to uPVC repair, it is important to avoid over-caulking. This will only make your window more difficult to clean and lower its energy efficiency.

Check that any drainage holes do not have debris inside them and that the sill pan has been angled correctly to drain away from the window. In more severe cases, you may need to replace the window.

Moldy sills and rotten ones are also signs of water leakage. The is a fungus that thrives in damp conditions and can quickly spread across the house.

It is also important to note that if the leak is coming from between the glass of your double-glazed windows, it's more likely to be an issue with the glass seal, rather than the frame or sliding. Again this can easily be repaired by a uPVC window expert who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be at fault for the reason that your uPVC window is difficult to open or if it blows open with the breeze. They can be easily replaced by any competent DIYer and are usually completed in a matter of minutes.

Most households in the UK will have either top hung or side-hung uPVC windows that are hinged and, just like any mechanical component they will wear out over time. It's very simple to change a window repair near me hinge but it's much easier if someone helps you to hold the frame.

It is also important to ensure that the uPVC hinges are being opened and closed in the right direction. You can check this by looking for the arrow on each hinge. This indicates which way the window should open.

The problem can be caused either by opening the window incorrectly or due to a poor installation at the factory. Sending us a picture through our website can often resolve the problem. We are more than happy to give suggestions.

Regularly lubricating the hinges is also necessary. This can be done by applying a light engineering oil to the hinges. We recommend using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regular lubrication can help the window operate and close more smoothly. It can also reduce the possibility of a window sticking and prevent corrosion. The ideal time to perform this every year. WD40 and other solvent-based lubricants are not recommended as they can cause damage to your uPVC windows.

5. Draughts

Draughts can be caused by a variety of different factors. The hinges may also become misaligned due to wear, creating an opening where the sash and frame meet. They can be fixed by giving them a good cleaning, but when they're beyond repair, it could be necessary to get them realigned or replaced. The second is the interlock, which is located on the hinge of the window, can also become misaligned, again it is possible to just give them a thorough clean, however in some instances it could be necessary to get them replaced.

These seals are susceptible to wear and tear or be damaged over time, allowing air escape. This can be avoided by replacing them with high-quality weatherstripping. Another alternative is to replace the window with low-emissivity glass. which will help regulate indoor temperatures, and also reduce draughts.

Lastly, one of the most effective methods to reduce the draughts in your home is to use a draught excluder. These are usually fabric tubes that are filled with some type of filler. They can be placed on top of your windowsill. They can keep your home warm by blocking out cold air.

With a bit of regular maintenance and repair, your upvc windows will continue to provide an excellent level of insulation and security for your home. However, it is important to recognise that all windows have a lifespan and eventually, they will reach a point where it is more cost-effective to replace them rather than fix them. If you are experiencing problems with your upvc windows, it is recommended to seek assistance from a professional immediately.