10 Myths Your Boss Is Spreading About Repairs To Upvc Windows

Repairs to uPVC Windows

uPVC is an excellent choice for modern homes. They are easy to maintain and durable, as well as long-lasting. They do not rot or rust like aluminum and timber.

It is important to clean and oil UPVC doors and windows regularly. This will help avoid unnecessary repair costs and improve the efficiency of energy.

1. Broken Glass

The damaged glass in your windows could cause serious damage to your home, and could even be fatal. It is essential to take the time to make sure that you are doing everything you can to ensure that your windows are in good repair.

For single pane windows, it is relatively easy to replace them, and the new window will generally fit within the old frame very easily. If windows with double panes are joined by internal beading, it is more difficult to remove and replace the old panes. In this situation you'll need to source some plastic spacers that will assist the new pane to fit perfectly into the frame of the window.

If you plan to attempt to remove the glass panes yourself it is crucial to wear the appropriate safety equipment such as gloves that are thick and protective eyewear. It is also recommended to lay down a drop cloth before you begin working on the glass so that any shards will fall on the fabric instead of landing on the floor where they can be trodden under and cause further damage.

It's a great idea cover the gap with tape after the glass has been removed. This will stop water and drafts from entering your home until a professional comes out to repair the window. This will also act as a barrier that will prevent any intruders to gain access to your home. If the gap is particularly large, you might think about an alarm door that comes with an integrated window as this will offer the best of both worlds.

2. Sagging

Upvc windows and doors are an affordable energy efficient, durable and long-lasting alternative to timber windows with sash. However, over time they are susceptible to a range of issues like sagging. A sagging window can cause problems with light, draughts and even security. It is crucial to act when you notice your uPVC windows are sliding.

To fix a sagging window you can try to reposition the hinges. First, you'll need to unblock the windows to get at the frame. You can then unscrew both the hinges at the top and window repair bottom using a screwdriver, and then adjust the hinges clockwise or counter-clockwise. Once you've repositioned the hinges, shut your window and test it for fit. If you are happy with the fit of the window, you can tighten screws to keep them in place.

If you cannot reposition the hinges, you may have to replace the seal. As time passes, rubber seals lose their elasticity and dry out, which causes them to lose tightness. If this happens, it's crucial to replace the seal as quickly as you can to ensure that your uPVC windows are watertight and window repair draught-proof.

uPVC handles could also become loose. Often, this is caused by screws that have become loose over time. However, it could also happen because the handle mechanism has worn out. Fortunately, it's easy to fix the handle of a window that is loose yourself. First, you'll need to shut the window and perform an initial fitting. The joint at the corners of the sash must align with the joint on the casing. If it doesn't you can use a screwdriver to loosen up the handle. Then turn the mechanism to position.

3. Water Leaks

It is crucial to act if you get up each morning to find mouldy walls and floors that are wet. Water leaks from windows can not only cause degrading of the structure of your home but also undermine your efforts to regulate the temperature in your home. Most often, uPVC window leaks are caused by a damaged or missing sealant.

It is a fairly easy fix and should be undertaken by any skilled DIYer. Depending on how severe the issue is, the old caulking might need to be removed. It is crucial to remember that when it comes to uPVC window repairs you should avoid the temptation to "over-caulk' as this will only make the area harder to clean and decrease the efficiency of your energy usage.

Make sure that the drainage holes do not have debris in them and that the sill pan has been angled correctly to drain away from the window. In more serious situations, you may have to replace the window.

Other indicators of long-term water leakage include sills that are rotten and the appearance of black spots of mold on the wall near the window. This fungus thrives under damp conditions and can spread quickly throughout the home.

It is also important to keep in mind that if the leakage is coming from between the glass in your double glazed windows, it's more likely to be an issue with the glass seal rather than the frame or sliding. A uPVC specialist can easily solve this problem by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

Hinges could be at fault when your upvc window repairs near me window is difficult to open or it opens in the breeze. Anyone with the skills to fix them can replace these in a matter of minutes.

Nearly every home in the UK will have top-hung or side-hung uPVC windows that use hinges and, just like any mechanical component they can wear down over time. It's very simple to replace a hinge on a window but it's much easier if someone else helps hold the frame.

Make sure that the uPVC hinges are open and closed in the proper direction. Check for the arrows on each hinge to determine the direction in which the window should be opened.

Faulty window hinges could be the result of incorrectly opening the window repair in a certain way or due to poor installation at the factory. Sending us a picture through our website can often resolve the problem. We are always happy to offer suggestions.

Regular lubrication of the hinges is also necessary. This can be done by applying a light engineering oil to the hinges. We suggest using a solvent-free lubricant such as 3-in-one Multi-Purpose Oil. Regular lubrication can make the window easier to open and close. It can also lower the possibility of a window sticking and prevent corrosion. This must be done at a minimum once a year. WD40 and other solvent-based oils are not recommended because they will damage parts of your uPVC window.

5. Draughts

Draughts can be caused by different things. Firstly the hinges, again due to wear and tear may become displaced, which can cause an opening to appear where the sash joins the frame. If they're beyond repair, it could be necessary to have them realigned. The second is the interlock, which is located on the hinge side of the window, can be misaligned. Again, it is possible to give them a clean but in some instances it could be necessary to have them replaced.

These seals can wear down or become damaged over time, allowing air escape. Replacement of these with high-quality weatherstripping is a good way to keep draughts at bay. Another option is to replace the upvc window with low-emissivity glass, this will help to regulate indoor temperatures, and also lessen the risk of draughts.

Lastly, one of the most effective ways to cut down on the draughts in your home is to use an draught excluder. These are typically made of fabric that are filled with some sort of filler and can be positioned on top of your windowsill. They will help block out cold air and keep your home warm and cozy!

With a little regular maintenance and repair, your upvc windows will provide a great level of insulation and security for your home. It is crucial to realize that all windows have a life span and eventually, they will reach a point where it is more economical to replace them than repair them. If you have any problems with your Window repair made of upvc, it's best to consult a professional immediately.