7 Simple Secrets To Totally Making A Statement With Your Window Repair

Window Repairs

Window repairs can help homeowners save money and help keep their homes comfortable. Window replacements may be required in the event of serious damage, such as broken glass or a broken window frame.

Many other issues can be fixed to extend the life of windows. Common issues include:

Broken or cracked panes

Cracked window glass could be caused by a lawnmowers that throws rocks in the wrong direction or branches of trees being blown by strong winds. This is not only visually bad, timber but it can cause higher energy bills as broken glass lets cold air into your house. Luckily, it's usually relatively simple to repair windows with broken panes.

Start by carefully removing the glass with gloves and safety glasses. You may need to use a utility knife to remove old glazing compound or putty around the frame's edges. Then, clean the surface of the glass and the frame's wood with a soft cloth or paper towel.

After cleaning the area, apply silicone caulking that is water-proof to the frame's perimeter. This will stop water from getting into the crack, which can cause further damage to the frame and the glass.

If you have double-pane glass cracks that are severe could damage the gas layer that lies between the panes and render your windows less efficient in insulating. If the crack is severe enough that it compromises the strength of the window, or if the pane inside is not there, you may need to consult a professional.

Cracks caused by thermal stress can occur when there's an extreme difference in temperature between the outside and inside of your home, causing the glass to expand or contract. If the cracks are located on two sides of a glass, it is best to replace it rather than attempt to repair it.

If your windows are cracked and not quite ready to be replaced, clear tape can do a great job of securing the crack and preventing bugs from entering cold air. You can even cut a piece of nylon stocking or tarp large enough to cover the crack, and fix it with duct tape. This is not an end-to-end solution, but it can keep insects out and cold air away from your home. If you notice cracks or blemishes on your older windows, you should check with your local company to see if replacing the whole window repair is the best option.

Rotten Wood

Wood rot is a common problem with windows. It can ruin the appearance of a home and also pose an hazard to safety. However, it is possible to repair wood that has rot. It is first necessary to identify the cause of the wood rot. Examine for leaks in the roof and other areas where water can enter the wood.

The next step is to remove the rotten parts of the window frame. This can be accomplished with an axe, a claw hammer, or rasp. After the rotten areas have been eliminated, you will need to replace them with new wood. Pre-treated wood is recommended for this project, as it is resistant to decay. If you are not able to replace the rotted timber, you can use wood hardener and filler to strengthen the damaged area. This type of product will be available at a majority of hardware stores. To get the best results, make sure you follow the instructions on the label.

After you have repaired the damaged areas of the window sill, it's essential to safeguard the area. This can be done by applying a water-resistant wood sealant. A product like Sikkens is an excellent option for this task.

You can also apply an epoxy filler that is two-part to protect the wood from further damage. It is easy to apply and leaves a beautiful finish. It is essential to follow the directions on the label. After the epoxy filler has dried, you are able to sand the wood's surface. It is best to begin with a rough grade of sandpaper before moving to a smoother one.

You don't want to expose the damaged part to further moisture. It is a good idea, so, to cover the repaired surface with an oil-based primer which will shield it from water. After that, you can apply the waterproof wood sealant.

The Won't open

A window that isn't opening can be the result of a variety of factors. Wood frames can warp when exposed to rainy weather, or the house might have sunk or someone could have nailed it shut to protect themselves. With a little patience and the right tools you can open the majority of stuck windows.

Accumulated debris or gunk could be the main cause of windows that aren't opening. The buildup of dirt and grime on the sliding tracks, hinges and locks over time, says Acme Glass. In addition, metal hardware can get rusty when in contact with humidity and direct sunlight. Spraying grease on these areas can help to prevent oxidation and keep your windows functioning well.

Stuck windows can also be the result of the breaking or loosening of the pulleys used to lift and lower the window. These components may lose tension and get blocked particularly when the window is situated two or more stories above the ground.

If you have trouble opening a door, you can use a pry-bar to gently push the window open. Place a block on the frame of the window to give the pry bar more leverage. Be careful not to harm the wood or the window. Try running a hairdryer along the frame's edges for several minutes. This will warm the wood, making it easier to move.

A damaged spring can be the cause of a window that won't raise or lower. Depending on who manufactured your windows, you'll need to refer to the owner's manual for additional instructions.

If you've tried cleaning the moving parts of your windows and then lubricating them but they're still unable to open It could be time to replace them with new, energy-efficient windows from Homespire Windows and Doors. Don't let your windows go from functional to useless since windows that aren't properly closed can expose your home to water damage and burglary. Contact us to learn more about our windows replacement and services today!