Defra Approved Back Boiler Stoves: A Simple Definition

Defra Approved Back Boiler Stoves

There are many things to take into consideration when selecting the best stove for your home. From the enticing appeal of dual functionality to the practical issues of installation, compliance and safety.

DEFRA approved back boiler stoves offer an excellent solution to these issues. They produce very little smoke since they use the absolute minimum amount combustion air.

Clean Burn Technology

A defra-approved back boiler stove is a great option to get a clean burning stove that can warm your home as well as provide hot water to your radiators. These stoves have an integrated steel boiler that can be used for heating your central heating system while the fire burns within the stove, which means it's a far more efficient method to use wood burning stoves.

The majority of our defra certified back boiler stoves come with an airwash system that is pre heated that assists in keeping the glass doors free of ash and soot deposits. They also have a secondary combustion system that operates by reburning any unburned particulates that were produced during the initial burn. This keeps the flue gases free of contaminants, which results in an efficient combustion process and lower fuel costs, which can save you money on your energy costs.

Some of our stoves are more efficient than this and have been independently tested to ensure they meet the new stricter DEFRA emission standards to become Defra SE (Smoke Exempt) approved. The stoves accomplish this by having an air vent on the top that stops you from closing it completely, which would cut off oxygen supply to the flame. This causes the fire to smoke instead of burning properly and release more pollutants into the atmosphere.

Another important aspect is the moisture content of your fuel. This could be a major contributor to the amount of smoke emitted by an electric stove. We suggest that you burn seasoned, dry wood with a moisture content of less than 20% to ensure your stove is burning as efficiently and efficiently as it can be. Most of our Defra approved stoves come with built-in moisture sensors which adjusts the rate of combustion accordingly when using wet or damp wood.

Some manufacturers have gone a step further to improve efficiency by adding a secondary clean burn system. This is controlled by a chrome lever at the lower part of the stove. It opens and closes an air vent that draws the air over the fire, and then reburns the smoke that was created from the initial process of burning. This makes our Defra SE approved stoves even more efficient, so you could save even more on your energy costs.

Easy to Clean

A back boiler stove that is defra-approved lets you run both your central heating as well as hot water from the same system. This is done by connecting a loop between other taps on the back boiler (there usually are two) and your hot water tank. You can then make use of thermosyphoning to get heat into the home. This also means that your boiler will never run out of hot water since it is fed by the tank.

To ensure that your stove is operating at its peak performance, you must clean it frequently. To begin, ensure the stove is ice cold. Then wipe down the body and door of the stove using a clean, dry cloth. We suggest using a microfiber cloth as these are far less abrasive than cotton ones.

After wiping down the stove's interior, it is a good idea to wash the glass. Glass cleaners can be found in a variety of hardware stores and can help remove stubborn stains and marks. Glass cleaner is best used sparingly since too much of it can harm glass surfaces.

As time passes, DEFRA recognized stoves the seals that surround your stove's doors and glass may begin to weaken. This can cause gaps which can leak heat and cause heat loss, which is why it is essential to replace these seals once each year. This can be done with stove rope, which is available at most hardware stores.

If you have an Eco Design 2022-compliant back burner on a stove that is defra-approved the combustion process will be much more efficient than traditional wood burning stoves. The latest technologies have made it possible to decrease the amount of combustibles released into air. This has made stoves that are compliant much more environmentally friendly and also more affordable to operate.

Another thing to keep in mind with a back boiler stove is that it will always be a little bit more expensive than a normal multifuel stove, because it produces more hot water than a standard multifuel stove. But, it's an economical method to heat your home, because you can power both your central heating and hot water through the same source.

Easy to Install

Boiler stoves can be utilized to provide heat to the room and hot water to your central heating system, making them a stylish and efficient work horse that is an efficient and economical option. In contrast to other multi-fuel stoves which require the connection of an existing gas boiler, wood burners with back boiler can connect directly to your mains hot water supply and central heating source without the need for a second heating system.

A wood burning with a back boiler can also be used to power your heating system entirely by renewable sources, making them a more green option over other stoves. In addition, since they burn wood and pellets, they generate fewer emissions than oil or defra recognized stoves gas heating systems, making them an excellent option for those concerned about the impact their energy consumption is having on global warming.

Many people are confused about how a wood-burning stove that has a back boiler operates installing one is relatively simple. It is crucial to ensure that the stove is installed and linked to your heating system, so it is recommended to have this carried out by a qualified heating engineer. They can verify that your stove is set up correctly and connected to the appropriate systems. They can also check that all safety devices are installed.

Defra Approved stoves, or Defra Exempt Stoves, as they are often referred to and have passed the Department of Environment, Food and Rural Affairs (DEFRA) standards for smoke emission levels. They can be utilized in Smoke Control Areas. They have been modified and tested to ensure they provide an extremely efficient combustion and can be utilized with smokeless or wood fuels.

DEFRA approved stoves such as the Defra Exempt Dunsley Yorkshire or our best-selling Hi-Flame Aidan can provide a highly efficient burn while producing very little harmful emissions. They have been tested according to the new Eco Design regulations which restrict the amount of particulate matter as well as NOx, CO2 and organic gases the stove produces in normal operation.

Perfect for Smoke Control Areas

The majority of UK cities and towns are classified as Smoke Control Areas and burning logs on older stoves or open fires can be a cause for a fine if they are producing smoke emissions that are nuisance to the public. The good news is that Defra approved back boiler stoves aren't subject to these restrictions if you select the right appliance for your home.

The defra Recognized stoves exempt wood burners are engineered to make use of Clean Burn technology which ensures that any fuel burned is burnt efficiently with minimal smoke production. This means that you can still have a beautiful fireplace even if you live in a smoke controlled area however, you'll have to limit the use of logs to smokeless mineral fuels.

To meet Defra requirements the stoves are airtight chambers to control precisely airflow. They typically employ triple airflow systems to ensure that combustion byproducts are burned up before they can escape the chimney. This reduces nuisance smoke and reduces the accumulation of soot which can block the flue or reduce gas efficiency.

It is essential to buy a Defra-approved, Defra-certified stove from a reputable local retailer that can ensure that the proper size stove is chosen for your space to provide maximum heating efficiency, and that it is properly installed by a registered HETAS installer. They can also help you determine the best chimney liner to ensure a safe installation, and also provide guidance on whether your home needs additional ventilation.

Modern DEFRA approved stoves are far superior to traditional wood burners or open fires. They provide a minimum 75 percent efficiency, which not only reduces your carbon footprint but also helps you save money. Additionally, Defra approved stoves can be used in a smoke controlled area, and will require a minimum 6mm stainless steel twin wall chimney liner that is cheaper than the larger 12mm liners that are required for Ecodesign stoves.

If you are in any doubt whether your property is in a smoke-free area, consult your local council, who can provide you with the latest information. Most reliable stove manufacturers have a dedicated Defra exempt section of their range so that you can easily identify the appliances you are looking for when shopping.