How To Tell If You re At The Right Level To Go After Saab 9-3 Key Replacement

How to Replace the Replacement Key Battery For the Saab 9-3

Saab owners have a unique procedure to add an additional key. It requires dealer service with a handheld computer dubbed Tech-2. A new key and transponder are required to be purchased and then programmed to the car.

Rotate your keys to prevent one from wearing out quicker than the other. This will also ensure that your keys remain in pristine condition.

Replacement Case

The new key fobs do not look like the old Saab keys. They have electronics which make it hard to duplicate. This has made stealing cars significantly more difficult than 20 years ago. However, it has also made replacing lost keys an incredibly expensive task.

Saab 9-3 owners should have two keys working. It is costly to replace a lost key because it requires replacing the CIM module, as well as changing the locking cylinders. Dealers charge between $100-$200 for this.

There are a few ways to avoid these costly. Some parts retailers will look up the code on an old key (usually the same one that opens the doors and turns off the ignition) and cut a brand new key blade from metal for only a fraction of the dealer's cost. The key, however, must be identical to the original to work correctly within your car.

You can also replace the case yourself by following these steps. You'll need an flathead screwdriver and patience. With the screwdriver, you can pry apart the plastic, and then take off the emergency key. Once the case is open remove all electronics and put them in the new case. Make sure you insert the correct key and badge into the case.

Replacement Battery

The replacement battery for the saab car key replacement 9-3 is a low-cost part that can be replaced easily and quickly. This DIY video from YouTube user Cyclone Cyd explains how to replace the battery in the remote key fob in only four steps. This tutorial should work with any modern saab Key fob repair (https://cardistry.wiki) key fob. However, the process might differ slightly.

The first step is to find the button that opens the backup key on the fob. This button is usually on the back of the fob, close to the Saab Logo. Use a flathead screwdriver to insert the screwdriver through the small hole on this button. This should be enough to let the fob case open so that you can change the battery.

After you have installed the batteries CR1632, you can restore the remote key fob. Then, you can program it into your car. The whole process should take more than an hour or less. It is a very simple procedure that doesn't require any special tools.

The process is more complicated in the event that you lose the key, but it's possible. The dealer will have to find the VIN number of the car and then order a replacement key blade and a TWICE module with the exact unique code. The dealer will then need to program the key using MDI, a new software tool.

Replacement Key Fob

The key fob is the piece that locks and unlocks your car, it's got a battery inside. Batteries have a limited lifespan and will eventually die. This is a problem that occurs in all vehicles. The good news is that you can change the batteries in most key fobs, without having to replace the entire case. You can purchase replacement fobs on Amazon that come with all the electronic components already in place, so you'll just pop open the case and replace those batteries that are old. You will need to remove the emergency key before you can replace the batteries. To do this, insert a small flathead screwsdriver into the slot that is in the middle. Work the screwdriver around the case, and it will split open, making it easy to remove.

When you are ready to replace your keys, make sure you have a spare because this can cut down your total cost by a significant amount. If you have an extra key, you can ask the dealer to cut the key and program it for your car. This is much cheaper than buying a new key fob.

It is possible to add another key to your car If you don't already have one, but it takes an extensive amount of research and effort. It can cost a few hundred dollars to purchase a second car key. The computer of the car must also be programmed. Professionals can accomplish this however it's a costly option.

Replacement Ignition

The latest SAAB 9-3 features a more sophisticated alarm system built around a key code. If you lose your primary key, it may be costly to replace it with another one since the car needs to have a specific computer installed and be programmed to accept a brand new key. Most locksmiths cannot do this and a dealer will charge several hundred dollars just to program the new key!

Dealers will charge you the highest price to replace your car's computer (also called the CIM or SAAB twice) when you lose the only working key. Instead we can reprogramme the EEPROM of your current car computer to make it ready for a replacement key, which will save you more than 50% of what you'd spend at a dealer.

If you've been a faithful owner of a 03-11 SAAB 9-3, then you likely have noticed that the ignition switch isn't the most robust. If your ignition key isn't functioning properly, it is time to think about replacing it. They can become extremely sticky and the buttons have been known to fall off. Luckily, replacing the ignition key isn't as complicated as it sounds, and it can be done quickly with the right tools.