10 Myths Your Boss Has Concerning Repairs To Upvc Windows

Repairs to uPVC Windows

uPVC windows are an excellent option for modern homes. They are easy to maintain and are durable and long-lasting. They do not rot or rust like timber and aluminum.

Cleaning and lubricating regularly UPVC windows and doors is vital. This will help avoid unnecessary repair costs and improve energy efficiency.

1. Broken Glass

The damaged glass in your windows could cause serious damage to your home, and could even be fatal. It is crucial to take the time to ensure that you're doing all you can to keep your windows in good condition.

For single pane windows, it can be relatively simple to replace windows, and the new one will generally fit within the old frame very easily. However If windows with double panes are secured by internal beading, it will be more difficult to get rid of the panes that are in place and replace them with new ones. In this situation it is essential to purchase plastic spacers to make sure that the new pane fits into the window frame.

Wearing eye protection and heavy gloves is a must for anyone who plans to remove the glass by yourself. You should also lay down a dropcloth prior to you begin working on the window panes, so that any shards fall on the fabric and not onto the floor and could be trampled.

It's a great idea seal the gap after the glass has been removed. This will stop water and drafts from entering your home until a professional comes out to fix the window. This will also act as a barrier, deterring any intruders to gain access to your home. If the distance between the window and the door is large, you might want to use a security screen that also has a window. This will provide the best of both.

2. Sagging

uPVC windows and doors are a low-cost energy efficient, durable and long-lasting alternative to timber windows with sash. However, with time, they can suffer from a variety of problems including sagging. A sagging uPVC windows can cause problems with light, draughts, and even security. It is crucial to act as soon as you notice your uPVC windows are sagging.

Repositioning the hinges could help fix a window that is sagging. To do this, you'll need open the window so that you can access the frame. Then, using a screwdriver, you can take off the top and bottom hinges and adjust them by turning them clockwise or anti-clockwise. Close your window to test the fit after you've relocated your hinges. If you're satisfied with the fit, you can tighten the screws until they stay in the right place.

If you can't reposition the hinges, you might need to replace the seal. Over time rubber seals can lose their elasticity and dry out and cause their tightness to decrease. If this happens, it's essential to replace the seal as fast as you can to ensure that your uPVC windows are waterproof and safe from drafts.

uPVC handles can also loosen up. This is usually due to screws that have become undone over time, but it could be due to the handle mechanism getting worn out. It's a good thing that it's simple to repair a loose uPVC window handle yourself. You'll first need to close the window and then perform an initial fitting. The joint at the corner of the sash must align with the joint on the casing. If it doesn't, you can use a screwdriver or a wrench to loosen the handle and turn the mechanism back into its original position.

3. Water Leaks

It is important to take action if you wake up every morning to find mouldy walls and floors that are wet. Water leaks through windows can cause structural damage to your home and also impact your ability to regulate the temperature of your home. Most often, uPVC window leaks are caused by damaged or missing sealant.

It is a fairly easy fix that can be done by any competent DIYer. Depending on the severity of the issue is, old caulking may have to be removed. When it comes to uPVC repair, it is important to be careful not to over-caulk. This can make your window harder to clean and Upvc Window Repair reduce its energy efficiency.

Make sure that the drainage holes are free of debris in them, and also ensure that the sill pan has been properly angled to drain away from the window. In more serious instances, you might have to consider replacing the window.

Other signs of long-term water leakage include sills that are rotten and the appearance of black spots of mold on the wall near the window. This mold thrives in damp environments and is able to quickly spread throughout the house.

If the leakage is occurring between the double-glazed glass, it is more likely the issue is with the seal than the frame. A uPVC specialist can easily solve this problem by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

Hinges may be to blame for the reason that your upvc window repairs window is difficult to open or if it blows open with a breeze. These are easily repaired by any DIYer who is skilled and can usually be completed in a matter of minutes.

Most households in the UK will have top-hung or side-hung uPVC windows that use hinges and, like all mechanical parts, they can wear down over time. It's easy to change the hinges on a window however it is easier if someone helps you hold the frame.

It is also worth checking that the uPVC hinges are opening and closed in the right direction. Check for the arrows on each hinge to determine which direction the window should be opened.

Faulty window hinges could be the result of incorrectly opening the window in a certain way or by inadequate installation at the factory. This can often be resolved by sending us a photograph via our website and we will be happy to give you advice.

It is also crucial to grease the hinges on a regular basis. This can be done by applying an oil that is light in nature to the hinges. We suggest using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regular lubrication can help the window operate and close more easily. It can also lower the risk of a window getting stuck and stop corrosion. Ideally, you should do this once a year. WD40 and other solvent-based fluids are not recommended since they can damage the parts of your uPVC window.

5. Draughts

Draughts can be caused by different things. First, the hinges due to wear and tear may become displaced, which can cause gaps to develop where the sash joins the frame. If they are damaged beyond repair, it could be required to realign them. The interlock may be unbalanced. This is located on the hinge's side and may need to be cleaned. In some cases it is possible to replace the hinges.

The next most common reason for draughts are the window seals. They can become worn down or damaged over time, and let air escape through the gaps. Replacing these with high-quality weatherstripping can help keep draughts at bay. Another option is to replace the Upvc Window Repair window with low-emissivity glass. which will help regulate indoor temperatures and again will lessen the possibility of draughts.

Another, and most effective methods to reduce drafts is to use a draught excluder. These are typically made of fabric filled with some sort of filler and can be placed on the windowsill on top. These will help to block out cold air and keep your home warm and cosy!

With a little maintenance and repairs windows made of upvc will continue to provide excellent insulation and Upvc window repair security for your home. It is crucial to keep in mind that all windows eventually wear out and it could be more cost-effective to replace them instead of fixing them. So, if you're experiencing problems with your upvc windows, it is always recommended to seek help from a professional as soon as possible.